CentOS Linux 7 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS7：CLSA-2026：1785561693 2026 公告中提及的多个漏洞的影响。

  - 在 Linux 内核中发现一个缺陷，此缺陷允许用户空间以零偏移和缓冲区长度调用 memcpy_fromiovecend() 和类似函数，从而导致读取超出缓冲区边界，在某些情况下，通过访问无效的内存地址可造成内存访问错误和系统暂停。此问题仅影响 Red Hat Enterprise Linux 7 随附的 kernel 3.10.x 版。(CVE-2018-16885)

  - 在 Linux 内核 6.3.2 之前的版本中发现问题。在 drivers/media/pci/saa7134/saa7134-core.c 的 saa7134_finidev 中发现释放后使用。(CVE-2023-35823)

  - 已修复 Linux 内核中的下列漏洞：RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work.
    (CVE-2025-38024)

  - 已修复 Linux 内核中的下列漏洞：RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80 (CVE-2026-23243)

  - 已修复 Linux 内核中的下列漏洞：nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. (CVE-2026-31402)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

检测

CentOS Linux 7 [TuxCare] 安全更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / 等多个漏洞（CENTOS7：CLSA-2026：1785561693）

high Nessus 插件 ID 361392

版本 1.2

检测

CentOS Linux 7 [TuxCare] 安全更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / 等多个漏洞 （CENTOS7：CLSA-2026：1785561693）

high Nessus 插件 ID 361392

版本 1.2

CentOS Linux 7 [TuxCare] 安全更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / 等多个漏洞（CENTOS7：CLSA-2026：1785561693）