Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - ubifs修复 ubifs_wbuf_write_nolock() 函数中的读取越界问题 ubifs_wbuf_write_nolock() 函数可能会在下列进程中越界访问缓冲区 ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // 假设 len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // 不满足 if (wbuf->used) {ubifs_leb_write() // 在avail 中填充某些数据 wbuf len -= wbuf ->avail; // len 仍未进行 8 字节对齐 aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift;
    err = ubifs_leb_write(c, wbuf->lnum, buf +written, wbuf->offs, n); // n > len，越界读取小于 8(n-len) 字节} 可由 KASAN 捕获
    ================================================== ======= BUGKASANecc_sw_hamming_calculate+0x1dc/0x7d0 地址 ffff888105594ff8 大小 4 的读取中由任务 kworker/u8:4/128 Workqueue 造成的 slab 越界回写 wb_workfn (flush-ubifs_0_0) 调用跟踪: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80函数 ubifs_wbuf_write_nolock() 接受参数“len”非 8 字节对齐“len”代表缓冲区的真实长度在“ubifs_jnl_xxx”中分配例如 ubifs_jnl_write_inode因此 ubifs_wbuf_write_nolock() 必须处理从 读取的长度仔细检查“buf”以安全写入 leb。在 [Link] 中获取复制器。 (CVE-2021-47636)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

如 TuxCare CENTOS6：CLSA-2025：1748366748 10 公告所述，CentOS Linux 6 主机上存在安装的程序包，该漏洞会受到多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs() The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
    __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. If userspace passes a large length we will get a negative 'alen'.
    Switch n, alen, and rlen to u32. (CVE-2021-47219)

  - 已修复 Linux 内核中的下列漏洞：ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() Function ubifs_wbuf_write_nolock() may access buf out of bounds in following process: ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // Not satisfy if (wbuf->used) { ubifs_leb_write() // Fill some data in avail wbuf len -= wbuf->avail; // len is still not 8-bytes aligned aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; err = ubifs_leb_write(c, wbuf->lnum, buf + written, wbuf->offs, n); // n > len, read out of bounds less than 8(n-len) bytes } , which can be catched by KASAN: ========================================================= BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0 Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80 Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8 bytes aligned, the 'len' represents the true length of buf (which is allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully to write leb safely. Fetch a reproducer in [Link]. (CVE-2021-47636)

  - 已修复 Linux 内核中的下列漏洞：ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. (CVE-2022-48701)

  - 已修复 Linux 内核中的下列漏洞：udf: fix uninit-value use in udf_get_fileshortad Check for overflow when computing alen in udf_current_aext to mitigate later uninit-value use in udf_get_fileshortad KMSAN bug[1]. After applying the patch reproducer did not trigger any issue[2]. [1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df [2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 (CVE-2024-50143)

  - 已修复 Linux 内核中的下列漏洞：wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0:
    il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0:
    RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0:
    il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0:
    il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0:
    il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0:
    il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0:
    __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0:
    il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING:
    CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated--- (CVE-2024-50234)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
229856	Linux Distros 未修补的漏洞：CVE-2021-47636	Nessus	Misc.	2025/3/5	2026/7/17	high
353101	CentOS Linux 6 [TuxCare] 安全更新：kernel / kernel-abi-whitelists / kernel-debug / kernel-debug-devel / 等多个漏洞（CENTOS6：CLSA-2025：1748366748）	Nessus	CentOS Local Security Checks	2026/9/30	2026/9/30	high

检测

插件搜索

high

high