Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - netlink邊界檢查結構 nlmsgerr 建立 在準備 FORTIFY_SOURCE 對 memcpy() 執行邊界檢查從 __nlmsg_put 改為 nlmsg_put()並說明處理跨複合彈性陣列結構的 memcpy() 時的邊界檢查。避免這個未來的執行時間警告memcpy偵測到 net/netlink/af_netlink.c:2447 (大小 16) 的單一欄位 &errmsg->msg 的跨欄寫入 (大小 32) (CVE-2022-49766)

請注意，Nessus 依賴供應商報告的套件存在。

AlmaLinux 9.2 主機安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1783791447 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. (CVE-2021-47416)

  - 在 Linux 核心的 TeleTYpe 子系統中發現超出邊界讀取缺陷。由於 flush_to_ldisc 函式中存在記憶體洩漏弱點，使用者利用 ioctls 的 TIOCSPTLCK、TIOCGPTPEER、TIOCSTI 和 TCXONC 觸發爭用情形時會發生此問題。本機使用者可利用此缺陷造成系統當機，或從記憶體讀取未經授權的隨機資料。(CVE-2022-1462)

  - 已解決 Linux 核心中的下列弱點：can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - 已解決 Linux 核心中的下列弱點：tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - 已解決 Linux 核心中的下列弱點：list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2026：1783791447公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. (CVE-2021-47416)

  - 在 Linux 内核的 TeleTYpe 子系统中发现越界读取缺陷。在 flush_to_ldisc 函数中存在内存泄漏时，用户使用 ioctls TIOCSPTLCK 和 TIOCGPTPEER 以及 TIOCSTI 和 TCXONC 触发争用条件时会发生此问题。此缺陷会让本地用户导致系统崩溃或从内存读取未经授权的随机数据。 (CVE-2022-1462)

  - 已修复 Linux 内核中的下列漏洞：can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - 已修复 Linux 内核中的下列漏洞：tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - 已修复 Linux 内核中的下列漏洞：list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - netlink边界检查结构 nlmsgerr 创建 在准备让 FORTIFY_SOURCE 在 memcpy() 上执行边界检查时从 __nlmsg_put 切换到 nlmsg_put()并说明用于处理跨灵活复合数组结构的 memcpy() 的边界检查。避免此未来运行时警告memcpy在 net/netlink/af_netlink.c:2447 (大小 16) 中检测到单个字段 &errmsg->msg 的字段跨度写入 (大小 32) (CVE-2022-49766)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

AlmaLinux 9.2 ホストには、TuxCare ALMALINUX9.2:CLSA-2026:1783791447アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. (CVE-2021-47416)

  - Linux カーネルの TeleTYpe サブシステムに、領域外読み取りの欠陥が見つかりました。この問題は、ユーザーが ioctl の TIOCSPTLCK および TIOCGPTPEER、TIOCSTI および TCXONC を使用して、flush_to_ldisc 関数でメモリの漏洩を引き起こし、競合状態をトリガーする方法で発生します。この欠陥により、ローカルユーザーがシステムをクラッシュさせたり、権限のないランダムデータをメモリから読み取ったりする可能性があります。(CVE-2022-1462)

  - Linux カーネルでは、以下の脆弱性が解決されています: can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - Linux カーネルでは、以下の脆弱性が解決されています: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - Linux カーネルでは、以下の脆弱性が解決されています: list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - netlink境界チェック構造体 nlmsgerr の作成。memcpy() で境界チェックを行う FORTIFY_SOURCE の準備で、__nlmsg_put から nlmsg_put() へ切り替え、複合柔軟配列構造体において memcpy() を処理するための境界チェックについて説明します。この将来的なランタイム警告を回避します memcpynet/netlink/af_netlink.c:2447 サイズ 16で、単一フィールド &errmsg->msg のフィールドまたがる書き込みサイズ 32を検出しましたCVE-2022-49766

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - netlink: Bounds-check struct nlmsgerr creation In preparation for FORTIFY_SOURCE doing bounds-check on     memcpy(), switch from __nlmsg_put to nlmsg_put(), and explain the bounds check for dealing with the     memcpy() across a composite flexible array struct. Avoids this future run-time warning: memcpy: detected     field-spanning write (size 32) of single field &errmsg->msg at net/netlink/af_netlink.c:2447 (size 16)     (CVE-2022-49766)

Note that Nessus relies on the presence of the package as reported by the vendor.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1783791447 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot     reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED     indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but     device_register() was called In case of device_register() has been called we should call put_device() to     correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of     MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_     calling device_register(), because put_device() should be called even in case of device_register()     failure. (CVE-2021-47416)

  - An out-of-bounds read flaw was found in the Linux kernel's TeleTYpe subsystem. The issue occurs in how a     user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage     of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read     unauthorized random data from memory. (CVE-2022-1462)

  - In the Linux kernel, the following vulnerability has been resolved: can: isotp: sanitize CAN ID checks in     isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached     with a compliant CAN ID address configuration. The provided address information consisted of CAN ID     0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the     SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling     printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print     failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter     logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in     kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on     the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred()     is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so     that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following     lockdep error: ====================================================== WARNING: possible circular locking     dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752     [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470     kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2},     at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing     dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave     include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50     kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80     drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0     drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827     [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220     drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200     drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156     [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110     [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159     serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00     kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084     register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46     drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915     start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 ->     #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734     console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - In the Linux kernel, the following vulnerability has been resolved: list: fix a data-race around     ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is     empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to     avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless     ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait())     made some ep_events_available() calls lockless and added single call under a lock, finally commit     e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available()     lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by     task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init     include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events     fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40     fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281     [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80     fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0     arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes     by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available     fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40     fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281     [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80     fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0     arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 ->     0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS     Google 01/01/2011 (CVE-2022-49443)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
250155	Linux Distros 未修補的弱點：CVE-2022-49766	Nessus	Misc.	2025/8/15	2026/9/2	medium
352871	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc 多個弱點（ALMALINUX9.2：CLSA-2026：1783791447）	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/22	low
352871	AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / 等多个漏洞（ALMALINUX9.2：CLSA-2026：1783791447）	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/22	low
250155	Linux Distros 未修补的漏洞：CVE-2022-49766	Nessus	Misc.	2025/8/15	2026/9/2	medium
352871	AlmaLinux 9.2 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etcの複数の脆弱性(ALMALINUX9.2:CLSA-2026:1783791447)	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/22	low
250155	Linux Distros のパッチ未適用の脆弱性: CVE-2022-49766	Nessus	Misc.	2025/8/15	2026/9/2	medium
250155	Linux Distros Unpatched Vulnerability : CVE-2022-49766	Nessus	Misc.	2025/8/15	2026/9/2	medium
352871	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1783791447)	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/22	low

检测

插件搜索

medium

low

low

medium

low

medium

medium

low