Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且廠商未提供可用的修補程式。

  - 攻擊者可能會使用路徑遊走來處理 libzypp 在系列中17.x之前17.38.13或之前16.22.19處理的 .repo 檔案路徑元件，以內容填入 zypp 快取外部系統上的目錄。（CVE-2026-44942）

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - 攻击者在处理由 libzypp 17.38.1317.x16.22.19 处理的 .repo 文件的路径组件时存在一个路径遍历，用内容填充 zypp 缓存之外的系统目录。（CVE-2026-44942）

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

リモートの SUSE Linux SLES12 ホストには、SUSE-SU-2026:2628-1 のアドバイザリに記載された複数の脆弱性の影響を受けるパッケージがインストールされています。

    この libzypp の更新では、次の問題を修正します

    - CVE-2026-25707: 細工されたリポジトリメタデータにより、任意のローカルファイルが上書きされる可能性があります (bsc#1259802)。
    - CVE-2026-44942: .repo ファイルの「path=」エントリを介したパストラバーサル攻撃の可能性を修正しました (bsc#1267874)。

Tenable は、前述の記述ブロックを SUSE セキュリティアドバイザリから直接抽出しています。

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - 17.x シリーズの 17.38.13 以前、または 16.22.19 より前に libzypp によって処理された .repo ファイルのパスコンポーネントの処理におけるパストラバーサルにより、攻撃者がこれを利用して、zypp キャッシュ外部のシステムのディレクトリをコンテンツで埋める可能性があります。(CVE-2026-44942)

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

The remote SUSE Linux SLES16 / SLES_SAP16 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:22172-1 advisory.

    Changes in zypper:

    Update to 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.

    Changes in libzypp:

    Updated to 17.38.13:

    - A .repo files path= entry must not refer to a location       outside the repo (bsc#1267874, CVE-2026-44942)       A path= entry may solely denote a sub-directory of the baseurl       where the metadata are located. A relative path trying to access       data outside the baseurl is reported and sanitized.
    - Repo keyhint must denote a filename, no path (bsc#1267426,       CVE-2026-44941)
    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)

    Changes in libsolv:

    Updated to 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:2674-1 advisory.

    This update for libsolv, libzypp, zypper fixes the following issues

    - CVE-2026-9149: Heap buffer overflow in libsolv repo_add_solv via negative maxsize from crafted .solv     file       (bsc#1265935).
    - CVE-2026-9150: Stack-based buffer overflow in libsolv's Debian metadata parser when handling     SHA384/SHA512 checksums       (bsc#1265938).
    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44933: scan of the Mandatory signature verification plugin support (bsc#1265223).
    - CVE-2026-44941: path traversal via 'keyhint' (bsc#1267426).
    - CVE-2026-44942: .repo files can have an optional path which can lead to path traversal attacks     (bsc#1267874).
    - CVE-2026-48863: Fix buffer overflow when parsing EdDSA signature (bsc#1266039).

    Changes in libzypp:

    Updated to version 17.38.13 (35):

    - A .repo files 'path=' entry must not refer to a location       outside the repo (bsc#1267874, CVE-2026-44942)       A 'path=' entry may solely denote a sub-directory of the baseurl       where the metadata are located. A relative path trying to access       data outside the baseurl is reported and sanitized.
    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)
    - Fix preloader not caching packages from arch specific subrepos       (bsc#1253740)
    - Deprioritize invalid mirrors (fixes openSUSE/zypper#636)
    - Fix Product::referencePackage lookup (bsc#1259311)       Use a provided autoproduct() as hint to the package name of the       release package. It might be that not just multiple versions of       the same release package provide the same product version, but       also different release packages.
    - specfile: on fedora use %{_prefix}/share as zyppconfdir if       %{_distconfdir} is undefined (fixes #693)       This will set '-DZYPPCONFDIR=%{zyppconfdir}' for cmake.
    - Fall back to a writable location when precaching packages       without root (bsc#1247948)
    - Prepare a legacy /etc/zypp/zypp.conf to be installed on old distros.
      See the ZYPP.CONF(5) man page for details.
    - Fix runtime check for broken rpm --runposttrans (bsc#1257068)
    - Avoid libcurl-mini4 when building as it does not support ftp       protocol.
    - Translation: updated .pot file.
    - zypp.conf: follow the UAPI configuration file specification       (PED-14658)       In short terms it means we will no longer ship an       /etc/zypp/zypp.conf, but store our own defaults in       /usr/etc/zypp/zypp.conf. The systems administrator may choose to       keep a full copy in /etc/zypp/zypp.conf ignoring our config file       settings completely, or - the preferred way - to overwrite       specific settings via /etc/zypp/zypp.conf.d/*.conf overlay files.
      See the ZYPP.CONF(5) man page for details.
    - cmake: correctly detect rpm6 (fixes #689)
    - Use 'zypp.tmp' as temp directory component to ease setting up       SELinux policies (bsc#1249435)
    - zyppng: Update Provider to current MediaCurl2 download       approach, drop Metalink ( fixes #682 )

    Changes in libsolv:

    Updated to version 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format
    - respect the 'default' attribute in environment optionlist in       the comps parser
    - support suse namespace deps in boolean dependencies [bsc#1258193]
    - support for the Elbrus2000 (e2k) architecture
    - support language() suse namespace rewriting

    Changes in zypper:

    Update to version 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.
    - Report download progress for command line rpms (fixes #613)
    - Hint to '-vv ref' to see the mirrors used to download the       metadata (bsc#1257882)
    - Service: Allow 'zypper ls SERVICE ...' to test whether a       service with this alias is defined (bsc#1252744)       The command prints an abstract of all services passed on the       command line. It returns 3-ZYPPER_EXIT_ERR_INVALID_ARGS if some       argument does not name an existing service.
    - Keep repo data when updating the service settings (bsc#1252744)
    - info: Enhance pattern content table (bsc#1158038)       Alternatives (multiple packages providing the same requirement)       are now listed as a single entry in the content table. The entry       shows either the installed package which satisfies the       requirement or the requirement itself as type 'Provides'.
      Listing all potential alternatives was miss leading, especially       if the alternatives were mutual exclusive. It looked like an       installed pattern had not-installed requirements and it was not       possible to install all requirements at the same time.

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES12 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:2628-1 advisory.

    This update for libzypp fixes the following issue

    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44942: Fixed possible path traversal attacks via .repo files 'path=' entries (bsc#1267874).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - A path traversal in handling the path component of .repo files processed by libzypp before 17.38.13 in     the 17.x series, or before 16.22.19 could be used by attackers to fill directories on the system outside     of the zypp cache with content. (CVE-2026-44942)

Note that Nessus relies on the presence of the package as reported by the vendor.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:2575-1 advisory.

    This update for libsolv, libzypp, zypper fixes the following issues

    - CVE-2026-9149: Heap buffer overflow in libsolv repo_add_solv via negative maxsize from crafted .solv     file       (bsc#1265935).
    - CVE-2026-9150: Stack-based buffer overflow in libsolv's Debian metadata parser when handling     SHA384/SHA512 checksums       (bsc#1265938).
    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44933: scan of the Mandatory signature verification plugin support (bsc#1265223).
    - CVE-2026-44941: path traversal via 'keyhint' (bsc#1267426).
    - CVE-2026-44942: .repo files can have an optional path which can lead to path traversal attacks     (bsc#1267874).
    - CVE-2026-48863: Fix buffer overflow when parsing EdDSA signature (bsc#1266039).

    Changes in libzypp:

    Updated to version 17.38.13 (35):

    - A .repo files 'path=' entry must not refer to a location       outside the repo (bsc#1267874, CVE-2026-44942)       A 'path=' entry may solely denote a sub-directory of the baseurl       where the metadata are located. A relative path trying to access       data outside the baseurl is reported and sanitized.
    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)
    - Fix preloader not caching packages from arch specific subrepos       (bsc#1253740)
    - Deprioritize invalid mirrors (fixes openSUSE/zypper#636)
    - Fix Product::referencePackage lookup (bsc#1259311)       Use a provided autoproduct() as hint to the package name of the       release package. It might be that not just multiple versions of       the same release package provide the same product version, but       also different release packages.
    - specfile: on fedora use %{_prefix}/share as zyppconfdir if       %{_distconfdir} is undefined (fixes #693)       This will set '-DZYPPCONFDIR=%{zyppconfdir}' for cmake.
    - Fall back to a writable location when precaching packages       without root (bsc#1247948)
    - Prepare a legacy /etc/zypp/zypp.conf to be installed on old distros.
      See the ZYPP.CONF(5) man page for details.
    - Fix runtime check for broken rpm --runposttrans (bsc#1257068)
    - Avoid libcurl-mini4 when building as it does not support ftp       protocol.
    - Translation: updated .pot file.
    - zypp.conf: follow the UAPI configuration file specification       (PED-14658)       In short terms it means we will no longer ship an       /etc/zypp/zypp.conf, but store our own defaults in       /usr/etc/zypp/zypp.conf. The systems administrator may choose to       keep a full copy in /etc/zypp/zypp.conf ignoring our config file       settings completely, or - the preferred way - to overwrite       specific settings via /etc/zypp/zypp.conf.d/*.conf overlay files.
      See the ZYPP.CONF(5) man page for details.
    - cmake: correctly detect rpm6 (fixes #689)
    - Use 'zypp.tmp' as temp directory component to ease setting up       SELinux policies (bsc#1249435)
    - zyppng: Update Provider to current MediaCurl2 download       approach, drop Metalink ( fixes #682 )

    Changes in libsolv:

    Updated to version 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format
    - respect the 'default' attribute in environment optionlist in       the comps parser
    - support suse namespace deps in boolean dependencies [bsc#1258193]
    - support for the Elbrus2000 (e2k) architecture
    - support language() suse namespace rewriting

    Changes in zypper:

    Update to version 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.
    - Report download progress for command line rpms (fixes #613)
    - Hint to '-vv ref' to see the mirrors used to download the       metadata (bsc#1257882)
    - Service: Allow 'zypper ls SERVICE ...' to test whether a       service with this alias is defined (bsc#1252744)       The command prints an abstract of all services passed on the       command line. It returns 3-ZYPPER_EXIT_ERR_INVALID_ARGS if some       argument does not name an existing service.
    - Keep repo data when updating the service settings (bsc#1252744)
    - info: Enhance pattern content table (bsc#1158038)       Alternatives (multiple packages providing the same requirement)       are now listed as a single entry in the content table. The entry       shows either the installed package which satisfies the       requirement or the requirement itself as type 'Provides'.
      Listing all potential alternatives was miss leading, especially       if the alternatives were mutual exclusive. It looked like an       installed pattern had not-installed requirements and it was not       possible to install all requirements at the same time.

    Original description from SUSE:Maintenance:44536:

    This update for libsolv, libzypp fixes the following issues

    Security issues:

    - CVE-2026-9149: Heap buffer overflow in libsolv repo_add_solv via negative maxsize from crafted .solv     file       (bsc#1265935).
    - CVE-2026-9150: Stack-based buffer overflow in libsolv's Debian metadata parser when handling     SHA384/SHA512 checksums       (bsc#1265938).
    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44933: scan of the Mandatory signature verification plugin support (bsc#1265223).
    - CVE-2026-44942: .repo files can have an optional path which can lead to path traversal attacks     (bsc#1267874).
    - CVE-2026-48863: Fix bufffer overflow when parsing EdDSA signature (bsc#1266039).

    Changes in libzypp:

    Updated to version 17.38.13 (35):

    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)
    - Fix preloader not caching packages from arch specific subrepos       (bsc#1253740)
    - Deprioritize invalid mirrors (fixes openSUSE/zypper#636)
    - Fix Product::referencePackage lookup (bsc#1259311)       Use a provided autoproduct() as hint to the package name of the       release package. It might be that not just multiple versions of       the same release package provide the same product version, but       also different release packages.
    - specfile: on fedora use %{_prefix}/share as zyppconfdir if       %{_distconfdir} is undefined (fixes #693)       This will set '-DZYPPCONFDIR=%{zyppconfdir}' for cmake.
    - Fall back to a writable location when precaching packages       without root (bsc#1247948)
    - Prepare a legacy /etc/zypp/zypp.conf to be installed on old distros.
      See the ZYPP.CONF(5) man page for details.
    - Fix runtime check for broken rpm --runposttrans (bsc#1257068)
    - Avoid libcurl-mini4 when building as it does not support ftp       protocol.
    - Translation: updated .pot file.
    - zypp.conf: follow the UAPI configuration file specification       (PED-14658)       In short terms it means we will no longer ship an       /etc/zypp/zypp.conf, but store our own defaults in       /usr/etc/zypp/zypp.conf. The systems administrator may choose to       keep a full copy in /etc/zypp/zypp.conf ignoring our config file       settings completely, or - the preferred way - to overwrite       specific settings via /etc/zypp/zypp.conf.d/*.conf overlay files.
      See the ZYPP.CONF(5) man page for details.
    - cmake: correctly detect rpm6 (fixes #689)
    - Use 'zypp.tmp' as temp directory component to ease setting up       SELinux policies (bsc#1249435)
    - zyppng: Update Provider to current MediaCurl2 download       approach, drop Metalink ( fixes #682 )

    Changes in libsolv:

    Updated to version 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format
    - respect the 'default' attribute in environment optionlist in       the comps parser
    - support suse namespace deps in boolean dependencies [bsc#1258193]
    - support for the Elbrus2000 (e2k) architecture
    - support language() suse namespace rewriting

    Update to version 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.
    - Report download progress for command line rpms (fixes #613)
    - Hint to '-vv ref' to see the mirrors used to download the       metadata (bsc#1257882)
    - Service: Allow 'zypper ls SERVICE ...' to test whether a       service with this alias is defined (bsc#1252744)       The command prints an abstract of all services passed on the       command line. It returns 3-ZYPPER_EXIT_ERR_INVALID_ARGS if some       argument does not name an existing service.
    - Keep repo data when updating the service settings (bsc#1252744)
    - info: Enhance pattern content table (bsc#1158038)       Alternatives (multiple packages providing the same requirement)       are now listed as a single entry in the content table. The entry       shows either the installed package which satisfies the       requirement or the requirement itself as type 'Provides'.
      Listing all potential alternatives was miss leading, especially       if the alternatives were mutual exclusive. It looked like an       installed pattern had not-installed requirements and it was not       possible to install all requirements at the same time.

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:2531-1 advisory.

    This update for libsolv, libzypp, zypper fixes the following issues

    - CVE-2026-9149: Heap buffer overflow in libsolv repo_add_solv via negative maxsize from crafted .solv     file       (bsc#1265935).
    - CVE-2026-9150: Stack-based buffer overflow in libsolv's Debian metadata parser when handling     SHA384/SHA512 checksums       (bsc#1265938).
    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44933: scan of the Mandatory signature verification plugin support (bsc#1265223).
    - CVE-2026-44941: path traversal via 'keyhint' (bsc#1267426).
    - CVE-2026-44942: .repo files can have an optional path which can lead to path traversal attacks     (bsc#1267874).
    - CVE-2026-48863: Fix buffer overflow when parsing EdDSA signature (bsc#1266039).

    Changes in libzypp:

    Updated to version 17.38.13 (35):

    - A .repo files 'path=' entry must not refer to a location       outside the repo (bsc#1267874, CVE-2026-44942)       A 'path=' entry may solely denote a sub-directory of the baseurl       where the metadata are located. A relative path trying to access       data outside the baseurl is reported and sanitized.
    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)
    - Fix preloader not caching packages from arch specific subrepos       (bsc#1253740)
    - Deprioritize invalid mirrors (fixes openSUSE/zypper#636)
    - Fix Product::referencePackage lookup (bsc#1259311)       Use a provided autoproduct() as hint to the package name of the       release package. It might be that not just multiple versions of       the same release package provide the same product version, but       also different release packages.
    - specfile: on fedora use %{_prefix}/share as zyppconfdir if       %{_distconfdir} is undefined (fixes #693)       This will set '-DZYPPCONFDIR=%{zyppconfdir}' for cmake.
    - Fall back to a writable location when precaching packages       without root (bsc#1247948)
    - Prepare a legacy /etc/zypp/zypp.conf to be installed on old distros.
      See the ZYPP.CONF(5) man page for details.
    - Fix runtime check for broken rpm --runposttrans (bsc#1257068)
    - Avoid libcurl-mini4 when building as it does not support ftp       protocol.
    - Translation: updated .pot file.
    - zypp.conf: follow the UAPI configuration file specification       (PED-14658)       In short terms it means we will no longer ship an       /etc/zypp/zypp.conf, but store our own defaults in       /usr/etc/zypp/zypp.conf. The systems administrator may choose to       keep a full copy in /etc/zypp/zypp.conf ignoring our config file       settings completely, or - the preferred way - to overwrite       specific settings via /etc/zypp/zypp.conf.d/*.conf overlay files.
      See the ZYPP.CONF(5) man page for details.
    - cmake: correctly detect rpm6 (fixes #689)
    - Use 'zypp.tmp' as temp directory component to ease setting up       SELinux policies (bsc#1249435)
    - zyppng: Update Provider to current MediaCurl2 download       approach, drop Metalink ( fixes #682 )

    Changes in libsolv:

    Updated to version 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format
    - respect the 'default' attribute in environment optionlist in       the comps parser
    - support suse namespace deps in boolean dependencies [bsc#1258193]
    - support for the Elbrus2000 (e2k) architecture
    - support language() suse namespace rewriting

    Changes in zypper:

    Update to version 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.
    - Report download progress for command line rpms (fixes #613)
    - Hint to '-vv ref' to see the mirrors used to download the       metadata (bsc#1257882)
    - Service: Allow 'zypper ls SERVICE ...' to test whether a       service with this alias is defined (bsc#1252744)       The command prints an abstract of all services passed on the       command line. It returns 3-ZYPPER_EXIT_ERR_INVALID_ARGS if some       argument does not name an existing service.
    - Keep repo data when updating the service settings (bsc#1252744)
    - info: Enhance pattern content table (bsc#1158038)       Alternatives (multiple packages providing the same requirement)       are now listed as a single entry in the content table. The entry       shows either the installed package which satisfies the       requirement or the requirement itself as type 'Provides'.
      Listing all potential alternatives was miss leading, especially       if the alternatives were mutual exclusive. It looked like an       installed pattern had not-installed requirements and it was not       possible to install all requirements at the same time.

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:2590-1 advisory.

    This update for libsolv, libzypp, zypper fixes the following issues

    - CVE-2026-9149: Heap buffer overflow in libsolv repo_add_solv via negative maxsize from crafted .solv     file       (bsc#1265935).
    - CVE-2026-9150: Stack-based buffer overflow in libsolv's Debian metadata parser when handling     SHA384/SHA512 checksums       (bsc#1265938).
    - CVE-2026-25707: Handcrafted repo metadata may cause arbitrary local files to be overwritten     (bsc#1259802).
    - CVE-2026-44933: scan of the Mandatory signature verification plugin support (bsc#1265223).
    - CVE-2026-44941: path traversal via 'keyhint' (bsc#1267426).
    - CVE-2026-44942: .repo files can have an optional path which can lead to path traversal attacks     (bsc#1267874).
    - CVE-2026-48863: Fix buffer overflow when parsing EdDSA signature (bsc#1266039).

    Changes in libzypp:

    Updated to version 17.38.13 (35):

    - A .repo files 'path=' entry must not refer to a location       outside the repo (bsc#1267874, CVE-2026-44942)       A 'path=' entry may solely denote a sub-directory of the baseurl       where the metadata are located. A relative path trying to access       data outside the baseurl is reported and sanitized.
    - Fix potential crash on malformed or malicious repository       metadata (fixes #740)
    - Repo metadata: discard entries referring to a location outside       the repo (bsc#1259802, CVE-2026-25707)       Mirroring those data locally would refer to a location outside       the repo's local cache directory. Those data entries are reported       and discarded.
    - zypp.conf: Allow [env] section to add environment variables.
      This feature is designed to enable environment-specific settings       or debugging options over an extended period. See zypp.conf(5).
    - Prevent configured scripts from escaping the sigcheck directory       (bsc#1265223, CVE-2026-44933)
    - StringV: guard hasPrefix/hasPrefixCI against reading past the       view end (fixes #735)
    - Mandatory signature verification plugin support (PED#11922)
    - Fix purge-kernel -rc kernel handling (bsc#1239718)
    - Explicitly_set_pool_DISTTYPE_RPM (fixes #726)
    - Check for trusted key updates when updating the general keyring       (bsc#1259706)
    - Support multiple MirroredOrigin authorities (bsc#1253193)
    - Workaround doxygen bug: doxygen/doxygen#12057
    - libzypp.spec: Add missing graphviz-gd BuildRequires (boo#1259842)
    - Fix preloader not caching packages from arch specific subrepos       (bsc#1253740)
    - Deprioritize invalid mirrors (fixes openSUSE/zypper#636)
    - Fix Product::referencePackage lookup (bsc#1259311)       Use a provided autoproduct() as hint to the package name of the       release package. It might be that not just multiple versions of       the same release package provide the same product version, but       also different release packages.
    - specfile: on fedora use %{_prefix}/share as zyppconfdir if       %{_distconfdir} is undefined (fixes #693)       This will set '-DZYPPCONFDIR=%{zyppconfdir}' for cmake.
    - Fall back to a writable location when precaching packages       without root (bsc#1247948)
    - Prepare a legacy /etc/zypp/zypp.conf to be installed on old distros.
      See the ZYPP.CONF(5) man page for details.
    - Fix runtime check for broken rpm --runposttrans (bsc#1257068)
    - Avoid libcurl-mini4 when building as it does not support ftp       protocol.
    - Translation: updated .pot file.
    - zypp.conf: follow the UAPI configuration file specification       (PED-14658)       In short terms it means we will no longer ship an       /etc/zypp/zypp.conf, but store our own defaults in       /usr/etc/zypp/zypp.conf. The systems administrator may choose to       keep a full copy in /etc/zypp/zypp.conf ignoring our config file       settings completely, or - the preferred way - to overwrite       specific settings via /etc/zypp/zypp.conf.d/*.conf overlay files.
      See the ZYPP.CONF(5) man page for details.
    - cmake: correctly detect rpm6 (fixes #689)
    - Use 'zypp.tmp' as temp directory component to ease setting up       SELinux policies (bsc#1249435)
    - zyppng: Update Provider to current MediaCurl2 download       approach, drop Metalink ( fixes #682 )

    Changes in libsolv:

    Updated to version 0.7.39:

    - fix solv_chksum_free segfault when called with a NULL pointer
    - made repo_add_solv more robust against corrupt files       [bsc#1265935] [CVE-2026-9149]
    - fix potential buffer overflow when verifying EdDSA signatures       [bsc#1266039] [CVE-2026-48863]
    - added limit checks in multiple places to catch overflows
    - reduce the size of the language id cache
    - fixed Debian canon selection
    - fixed dbpath detection in repo_rpmdb_librpm
    - reduced stack usage in repo page compression (needed for musl)
    - fix parsing of sha512 checksums in debian repositories       [bsc#1265938] [CVE-2026-9150]
    - improve speed of dirpool_add_dir makeing parsing of filelists.xml       twice as fast
    - fix parsing of recommends in the old Mandriva synthesis format
    - respect the 'default' attribute in environment optionlist in       the comps parser
    - support suse namespace deps in boolean dependencies [bsc#1258193]
    - support for the Elbrus2000 (e2k) architecture
    - support language() suse namespace rewriting

    Changes in zypper:

    Update to version 1.14.98:

    - Transactional systems: Delegate rw-commands to       transactional-wrapper if available (jsc#PED-13680, jsc#PED-15607)       On a transactional system where the root filesystem is mounted       read-only, zypper commands that modify the system cannot be       executed directly.
      If the system provides a transactional-wrapper utility, zypper       will automatically attempt to invoke it. The wrapper       transparently executes the zypper command within a new, writable       snapshot and manages the lifecycle of that snapshot based on the       command's exit status.
      On transactional systems lacking a transactional-wrapper, users       must manually invoke specialized tools -such as       transactional-update- to install, update, or remove software.
    - Add --filter-version-change to zypper lu.
      Adds filtering by version change significance to reduce noise in       update listings. Supports levels: rebuild (hides rebuild-only       changes) and package (hides all release-only changes).
    - Autorefresh ris-services the way as plugin-services (bsc#1246504)       It's actually wrong to treat service refreshes different       depending on the service type. For the purpose of a service it       makes no difference how the data about the repos to use are       acquired.
    - Report download progress for command line rpms (fixes #613)
    - Hint to '-vv ref' to see the mirrors used to download the       metadata (bsc#1257882)
    - Service: Allow 'zypper ls SERVICE ...' to test whether a       service with this alias is defined (bsc#1252744)       The command prints an abstract of all services passed on the       command line. It returns 3-ZYPPER_EXIT_ERR_INVALID_ARGS if some       argument does not name an existing service.
    - Keep repo data when updating the service settings (bsc#1252744)
    - info: Enhance pattern content table (bsc#1158038)       Alternatives (multiple packages providing the same requirement)       are now listed as a single entry in the content table. The entry       shows either the installed package which satisfies the       requirement or the requirement itself as type 'Provides'.
      Listing all potential alternatives was miss leading, especially       if the alternatives were mutual exclusive. It looked like an       installed pattern had not-installed requirements and it was not       possible to install all requirements at the same time.

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
321781	Linux Distros 未修補弱點：CVE-2026-44942	Nessus	Misc.	2026/6/20	2026/9/2	medium
321781	Linux Distros 未修补的漏洞：CVE-2026-44942	Nessus	Misc.	2026/6/20	2026/9/2	medium
323038	SUSE SLES12 セキュリティ更新 : libzypp (SUSE-SU-2026:2628-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/8/25	high
321781	Linux Distros のパッチ未適用の脆弱性: CVE-2026-44942	Nessus	Misc.	2026/6/20	2026/9/2	medium
322895	SUSE SLES16: libsolv-demo / libsolv-devel / libsolv-devel-static / libsolv-tools / etc (SUSE-SU-2026:22172-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/7/8	high
323889	SUSE SLED15: libsolv-devel / libsolv-tools / libsolv-tools-base / libzypp / etc (SUSE-SU-2026:2674-1)	Nessus	SuSE Local Security Checks	2026/6/30	2026/7/8	high
323038	SUSE SLES12 Security Update : libzypp (SUSE-SU-2026:2628-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/8/25	high
321781	Linux Distros Unpatched Vulnerability : CVE-2026-44942	Nessus	Misc.	2026/6/20	2026/9/2	medium
322932	SUSE SLED15: libsolv-devel / libsolv-tools / libsolv-tools-base / libzypp / etc (SUSE-SU-2026:2575-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/7/8	high
323067	SUSE SLED15: libsolv-devel / libsolv-tools / libsolv-tools-base / libzypp / etc (SUSE-SU-2026:2531-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/7/8	high
323082	SUSE SLED15: libsolv-devel / libsolv-tools / libsolv-tools-base / libzypp / etc (SUSE-SU-2026:2590-1)	Nessus	SuSE Local Security Checks	2026/6/26	2026/7/8	high

检测

插件搜索

medium

medium

high

medium

high

high

high

medium

high

high

high