The remote host is affected by the vulnerability described in GLSA-201607-15 (NTP: Multiple vulnerabilities)

    Multiple vulnerabilities have been discovered in NTP. Please review the       CVE identifiers referenced below for details.
  Impact :

    A remote attacker could possibly cause a Denial of Service condition.
  Workaround :

    There is no known workaround at this time.

ntp was updated to version 4.2.8p6 to fix 12 security issues.

These security issues were fixed :

  - CVE-2015-8158: Fixed potential infinite loop in ntpq     (bsc#962966).

  - CVE-2015-8138: Zero Origin Timestamp Bypass     (bsc#963002).

  - CVE-2015-7979: Off-path Denial of Service (DoS) attack     on authenticated broadcast mode (bsc#962784).

  - CVE-2015-7978: Stack exhaustion in recursive traversal     of restriction list (bsc#963000).

  - CVE-2015-7977: reslist NULL pointer dereference     (bsc#962970).

  - CVE-2015-7976: ntpq saveconfig command allows dangerous     characters in filenames (bsc#962802).

  - CVE-2015-7975: nextvar() missing length check     (bsc#962988).

  - CVE-2015-7974: Skeleton Key: Missing key check allows     impersonation between authenticated peers (bsc#962960).

  - CVE-2015-7973: Replay attack on authenticated broadcast     mode (bsc#962995).

  - CVE-2015-8140: ntpq vulnerable to replay attacks     (bsc#962994).

  - CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose     origin (bsc#962997).

  - CVE-2015-5300: MITM attacker could have forced ntpd to     make a step larger than the panic threshold     (bsc#951629).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to its self-reported version number, the remote pfSense install is prior to 2.3. It is, therefore, affected by multiple vulnerabilities.

The version of the remote NTP server is 3.x or 4.x prior to 4.2.8p6.
It is, therefore, affected by the following vulnerabilities :

  - A flaw exists in the receive() function due to the use     of authenticated broadcast mode. A man-in-the-middle     attacker can exploit this to conduct a replay attack.
    (CVE-2015-7973)

  - A time serving flaw exists in the trusted key system     due to improper key checks. An authenticated, remote     attacker can exploit this to perform impersonation     attacks between authenticated peers. (CVE-2015-7974)

  - An overflow condition exists in the nextvar() function     due to improper validation of user-supplied input. A     local attacker can exploit this to cause a buffer     overflow, resulting in a denial of service condition.
    (CVE-2015-7975)

  - A flaw exists in ntp_control.c due to improper filtering     of special characters in filenames by the saveconfig     command. An authenticated, remote attacker can exploit     this to inject arbitrary content. (CVE-2015-7976)

  - A NULL pointer dereference flaw exists in ntp_request.c     that is triggered when handling ntpdc relist commands.
    A remote attacker can exploit this, via a specially     crafted request, to crash the service, resulting in a     denial of service condition. (CVE-2015-7977)

  - A flaw exists in ntpdc that is triggered during the     handling of the relist command. A remote attacker can     exploit this, via recursive traversals of the     restriction list, to exhaust available space on the call     stack, resulting in a denial of service condition.
    CVE-2015-7978)

  - An unspecified flaw exists in authenticated broadcast     mode. A remote attacker can exploit this, via specially     crafted packets, to cause a denial of service condition.
    (CVE-2015-7979)

  - A flaw exists in the receive() function that allows     packets with an origin timestamp of zero to bypass     security checks. A remote attacker can exploit this to     spoof arbitrary content. (CVE-2015-8138)

  - A flaw exists in ntpq and ntpdc that allows a remote     attacker to disclose sensitive information in     timestamps. (CVE-2015-8139)

  - A flaw exists in the ntpq protocol that is triggered     during the handling of an improper sequence of numbers.
    A man-in-the-middle attacker can exploit this to conduct     a replay attack. (CVE-2015-8140)

  - A flaw exists in the ntpq client that is triggered when     handling packets that cause a loop in the getresponse()     function. A remote attacker can exploit this to cause an     infinite loop, resulting in a denial of service     condition. (CVE-2015-8158)

Network Time Foundation reports :

NTF's NTP Project has been notified of the following low- and medium-severity vulnerabilities that are fixed in ntp-4.2.8p6, released on Tuesday, 19 January 2016 :

- Bug 2948 / CVE-2015-8158: Potential Infinite Loop in ntpq. Reported by Cisco ASIG.

- Bug 2945 / CVE-2015-8138: origin: Zero Origin Timestamp Bypass.
Reported by Cisco ASIG.

- Bug 2942 / CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode. Reported by Cisco ASIG.

- Bug 2940 / CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list. Reported by Cisco ASIG.

- Bug 2939 / CVE-2015-7977: reslist NULL pointer dereference. Reported by Cisco ASIG.

- Bug 2938 / CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames. Reported by Cisco ASIG.

- Bug 2937 / CVE-2015-7975: nextvar() missing length check. Reported by Cisco ASIG.

- Bug 2936 / CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers. Reported by Cisco ASIG.

- Bug 2935 / CVE-2015-7973: Deja Vu: Replay attack on authenticated broadcast mode. Reported by Cisco ASIG.

Additionally, mitigations are published for the following two issues :

- Bug 2947 / CVE-2015-8140: ntpq vulnerable to replay attacks.
Reported by Cisco ASIG.

- Bug 2946 / CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin. Reported by Cisco ASIG.

ntp was updated to version 4.2.8p6 to fix 28 security issues.

Major functional changes :

  - The 'sntp' commandline tool changed its option handling     in a major way, some options have been renamed or     dropped.

  - 'controlkey 1' is added during update to ntp.conf to     allow sntp to work.

  - The local clock is being disabled during update.

  - ntpd is no longer running chrooted.

Other functional changes :

  - ntp-signd is installed.

  - 'enable mode7' can be added to the configuration to     allow ntdpc to work as compatibility mode option.

  - 'kod' was removed from the default restrictions.

  - SHA1 keys are used by default instead of MD5 keys.

Also yast2-ntp-client was updated to match some sntp syntax changes.
(bsc#937837)

These security issues were fixed :

  - CVE-2015-8158: Fixed potential infinite loop in ntpq     (bsc#962966).

  - CVE-2015-8138: Zero Origin Timestamp Bypass     (bsc#963002).

  - CVE-2015-7979: Off-path Denial of Service (DoS) attack     on authenticated broadcast mode (bsc#962784).

  - CVE-2015-7978: Stack exhaustion in recursive traversal     of restriction list (bsc#963000).

  - CVE-2015-7977: reslist NULL pointer dereference     (bsc#962970).

  - CVE-2015-7976: ntpq saveconfig command allows dangerous     characters in filenames (bsc#962802).

  - CVE-2015-7975: nextvar() missing length check     (bsc#962988).

  - CVE-2015-7974: Skeleton Key: Missing key check allows     impersonation between authenticated peers (bsc#962960).

  - CVE-2015-7973: Replay attack on authenticated broadcast     mode (bsc#962995).

  - CVE-2015-8140: ntpq vulnerable to replay attacks     (bsc#962994).

  - CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose     origin (bsc#962997).

  - CVE-2015-5300: MITM attacker could have forced ntpd to     make a step larger than the panic threshold     (bsc#951629).

  - CVE-2015-7871: NAK to the Future: Symmetric association     authentication bypass via crypto-NAK (bsc#951608).

  - CVE-2015-7855: decodenetnum() will ASSERT botch instead     of returning FAIL on some bogus values (bsc#951608).

  - CVE-2015-7854: Password Length Memory Corruption     Vulnerability (bsc#951608).

  - CVE-2015-7853: Invalid length data provided by a custom     refclock driver could cause a buffer overflow     (bsc#951608).

  - CVE-2015-7852: ntpq atoascii() Memory Corruption     Vulnerability (bsc#951608).

  - CVE-2015-7851: saveconfig Directory Traversal     Vulnerability (bsc#951608).

  - CVE-2015-7850: remote config logfile-keyfile     (bsc#951608).

  - CVE-2015-7849: trusted key use-after-free (bsc#951608).

  - CVE-2015-7848: mode 7 loop counter underrun     (bsc#951608).

  - CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC     (bsc#951608).

  - CVE-2015-7703: configuration directives 'pidfile' and     'driftfile' should only be allowed locally (bsc#951608).

  - CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD     should validate the origin timestamp field (bsc#951608).

  - CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete     autokey data packet length checks (bsc#951608).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This network time protocol server ntp was updated to 4.2.8p6 to fix the following issues :

Also yast2-ntp-client was updated to match some sntp syntax changes.
(bsc#937837)

Major functional changes :

  - The 'sntp' commandline tool changed its option handling     in a major way.

  - 'controlkey 1' is added during update to ntp.conf to     allow sntp to work.

  - The local clock is being disabled during update.

  - ntpd is no longer running chrooted.

Other functional changes :

  - ntp-signd is installed.

  - 'enable mode7' can be added to the configuration to     allow ntdpc to work as compatibility mode option.

  - 'kod' was removed from the default restrictions.

  - SHA1 keys are used by default instead of MD5 keys.

These security issues were fixed :

  - CVE-2015-5219: An endless loop due to incorrect     precision to double conversion (bsc#943216).

  - CVE-2015-8158: Fixed potential infinite loop in ntpq     (bsc#962966).

  - CVE-2015-8138: Zero Origin Timestamp Bypass     (bsc#963002).

  - CVE-2015-7979: Off-path Denial of Service (DoS) attack     on authenticated broadcast mode (bsc#962784).

  - CVE-2015-7978: Stack exhaustion in recursive traversal     of restriction list (bsc#963000).

  - CVE-2015-7977: reslist NULL pointer dereference     (bsc#962970).

  - CVE-2015-7976: ntpq saveconfig command allows dangerous     characters in filenames (bsc#962802).

  - CVE-2015-7975: nextvar() missing length check     (bsc#962988).

  - CVE-2015-7974: Skeleton Key: Missing key check allows     impersonation between authenticated peers (bsc#962960).

  - CVE-2015-7973: Replay attack on authenticated broadcast     mode (bsc#962995).

  - CVE-2015-8140: ntpq vulnerable to replay attacks     (bsc#962994).

  - CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose     origin (bsc#962997).

  - CVE-2015-5300: MITM attacker could have forced ntpd to     make a step larger than the panic threshold     (bsc#951629).

  - CVE-2015-7871: NAK to the Future: Symmetric association     authentication bypass via crypto-NAK (bsc#951608).

  - CVE-2015-7855: decodenetnum() will ASSERT botch instead     of returning FAIL on some bogus values (bsc#951608).

  - CVE-2015-7854: Password Length Memory Corruption     Vulnerability (bsc#951608).

  - CVE-2015-7853: Invalid length data provided by a custom     refclock driver could cause a buffer overflow     (bsc#951608).

  - CVE-2015-7852: ntpq atoascii() Memory Corruption     Vulnerability (bsc#951608).

  - CVE-2015-7851: saveconfig Directory Traversal     Vulnerability (bsc#951608).

  - CVE-2015-7850: remote config logfile-keyfile     (bsc#951608).

  - CVE-2015-7849: trusted key use-after-free (bsc#951608).

  - CVE-2015-7848: mode 7 loop counter underrun     (bsc#951608).

  - CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC     (bsc#951608).

  - CVE-2015-7703: configuration directives 'pidfile' and     'driftfile' should only be allowed locally (bsc#951608).

  - CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD     should validate the origin timestamp field (bsc#951608).

  - CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete     autokey data packet length checks (bsc#951608).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 14.04 LTS / 16.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-3096-1 advisory.

    Aanchal Malhotra discovered that NTP incorrectly handled authenticated broadcast mode. A remote attacker     could use this issue to perform a replay attack. (CVE-2015-7973)

    Matt Street discovered that NTP incorrectly verified peer associations of symmetric keys. A remote     attacker could use this issue to perform an impersonation attack. (CVE-2015-7974)

    Jonathan Gardner discovered that the NTP ntpq utility incorrectly handled memory. An attacker could     possibly use this issue to cause ntpq to crash, resulting in a denial of service. This issue only affected     Ubuntu 16.04 LTS. (CVE-2015-7975)

    Jonathan Gardner discovered that the NTP ntpq utility incorrectly handled dangerous characters in     filenames. An attacker could possibly use this issue to overwrite arbitrary files. (CVE-2015-7976)

    Stephen Gray discovered that NTP incorrectly handled large restrict lists. An attacker could use this     issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-7977, CVE-2015-7978)

    Aanchal Malhotra discovered that NTP incorrectly handled authenticated broadcast mode. A remote attacker     could use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-7979)

    Jonathan Gardner discovered that NTP incorrectly handled origin timestamp checks. A remote attacker could     use this issue to spoof peer servers. (CVE-2015-8138)

    Jonathan Gardner discovered that the NTP ntpq utility did not properly handle certain incorrect values. An     attacker could possibly use this issue to cause ntpq to hang, resulting in a denial of service.
    (CVE-2015-8158)

    It was discovered that the NTP cronjob incorrectly cleaned up the statistics directory. A local attacker     could possibly use this to escalate privileges. (CVE-2016-0727)

    Stephen Gray and Matthew Van Gundy discovered that NTP incorrectly validated crypto-NAKs. A remote     attacker could possibly use this issue to prevent clients from synchronizing. (CVE-2016-1547)

    Miroslav Lichvar and Jonathan Gardner discovered that NTP incorrectly handled switching to interleaved     symmetric mode. A remote attacker could possibly use this issue to prevent clients from synchronizing.
    (CVE-2016-1548)

    Matthew Van Gundy, Stephen Gray and Loganaden Velvindron discovered that NTP incorrectly handled message     authentication. A remote attacker could possibly use this issue to recover the message digest key.
    (CVE-2016-1550)

    Yihan Lian discovered that NTP incorrectly handled duplicate IPs on unconfig directives. An authenticated     remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service.
    (CVE-2016-2516)

    Yihan Lian discovered that NTP incorrectly handled certail peer associations. A remote attacker could     possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2016-2518)

    Jakub Prokes discovered that NTP incorrectly handled certain spoofed packets. A remote attacker could     possibly use this issue to cause a denial of service. (CVE-2016-4954)

    Miroslav Lichvar discovered that NTP incorrectly handled certain packets when autokey is enabled. A remote     attacker could possibly use this issue to cause a denial of service. (CVE-2016-4955)

    Miroslav Lichvar discovered that NTP incorrectly handled certain spoofed broadcast packets. A remote     attacker could possibly use this issue to cause a denial of service. (CVE-2016-4956)

    In the default installation, attackers would be isolated by the NTP AppArmor profile.

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - The ntpq saveconfig command in NTP 4.1.2, 4.2.x before 4.2.8p6, 4.3, 4.3.25, 4.3.70, and 4.3.77 does not     properly filter special characters, which allows attackers to cause unspecified impact via a crafted     filename. (CVE-2015-7976)

Note that Nessus relies on the presence of the package as reported by the vendor.

New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1, and -current to fix security issues.

ntp was updated to version 4.2.8p6 to fix 12 security issues.

Also yast2-ntp-client was updated to match some sntp syntax changes.
(bsc#937837)

These security issues were fixed :

  - CVE-2015-8158: Fixed potential infinite loop in ntpq     (bsc#962966).

  - CVE-2015-8138: Zero Origin Timestamp Bypass     (bsc#963002).

  - CVE-2015-7979: Off-path Denial of Service (DoS) attack     on authenticated broadcast mode (bsc#962784).

  - CVE-2015-7978: Stack exhaustion in recursive traversal     of restriction list (bsc#963000).

  - CVE-2015-7977: reslist NULL pointer dereference     (bsc#962970).

  - CVE-2015-7976: ntpq saveconfig command allows dangerous     characters in filenames (bsc#962802).

  - CVE-2015-7975: nextvar() missing length check     (bsc#962988).

  - CVE-2015-7974: Skeleton Key: Missing key check allows     impersonation between authenticated peers (bsc#962960).

  - CVE-2015-7973: Replay attack on authenticated broadcast     mode (bsc#962995).

  - CVE-2015-8140: ntpq vulnerable to replay attacks     (bsc#962994).

  - CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose     origin (bsc#962997).

  - CVE-2015-5300: MITM attacker could have forced ntpd to     make a step larger than the panic threshold     (bsc#951629).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

NTP was updated to version 4.2.8p8 to fix several security issues and to ensure the continued maintainability of the package.

These security issues were fixed :

CVE-2016-4953: Bad authentication demobilized ephemeral associations (bsc#982065).

CVE-2016-4954: Processing spoofed server packets (bsc#982066).

CVE-2016-4955: Autokey association reset (bsc#982067).

CVE-2016-4956: Broadcast interleave (bsc#982068).

CVE-2016-4957: CRYPTO_NAK crash (bsc#982064).

CVE-2016-1547: Validate crypto-NAKs to prevent ACRYPTO-NAK DoS (bsc#977459).

CVE-2016-1548: Prevent the change of time of an ntpd client or denying service to an ntpd client by forcing it to change from basic client/server mode to interleaved symmetric mode (bsc#977461).

CVE-2016-1549: Sybil vulnerability: ephemeral association attack (bsc#977451).

CVE-2016-1550: Improve security against buffer comparison timing attacks (bsc#977464).

CVE-2016-1551: Refclock impersonation vulnerability (bsc#977450)y

CVE-2016-2516: Duplicate IPs on unconfig directives could have caused an assertion botch in ntpd (bsc#977452).

CVE-2016-2517: Remote configuration trustedkey/ requestkey/controlkey values are not properly validated (bsc#977455).

CVE-2016-2518: Crafted addpeer with hmode > 7 causes array wraparound with MATCH_ASSOC (bsc#977457).

CVE-2016-2519: ctl_getitem() return value not always checked (bsc#977458).

CVE-2015-8158: Potential Infinite Loop in ntpq (bsc#962966).

CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).

CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).

CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).

CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).

CVE-2015-7976: ntpq saveconfig command allowed dangerous characters in filenames (bsc#962802).

CVE-2015-7975: nextvar() missing length check (bsc#962988).

CVE-2015-7974: NTP did not verify peer associations of symmetric keys when authenticating packets, which might have allowed remote attackers to conduct impersonation attacks via an arbitrary trusted key, aka a 'skeleton' key (bsc#962960).

CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).

CVE-2015-5300: MITM attacker can force ntpd to make a step larger than the panic threshold (bsc#951629).

CVE-2015-5194: Crash with crafted logconfig configuration command (bsc#943218).

CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK (bsc#952611).

CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values (bsc#952611).

CVE-2015-7854: Password Length Memory Corruption Vulnerability (bsc#952611).

CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow (bsc#952611).

CVE-2015-7852: ntpq atoascii() Memory Corruption Vulnerability (bsc#952611).

CVE-2015-7851: saveconfig Directory Traversal Vulnerability (bsc#952611).

CVE-2015-7850: Clients that receive a KoD now validate the origin timestamp field (bsc#952611).

CVE-2015-7849: Prevent use-after-free trusted key (bsc#952611).

CVE-2015-7848: Prevent mode 7 loop counter underrun (bsc#952611).

CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC (bsc#952611).

CVE-2015-7703: Configuration directives 'pidfile' and 'driftfile' should only be allowed locally (bsc#943221).

CVE-2015-7704: Clients that receive a KoD should validate the origin timestamp field (bsc#952611).

CVE-2015-7705: Clients that receive a KoD should validate the origin timestamp field (bsc#952611).

CVE-2015-7691: Incomplete autokey data packet length checks (bsc#952611).

CVE-2015-7692: Incomplete autokey data packet length checks (bsc#952611).

CVE-2015-7702: Incomplete autokey data packet length checks (bsc#952611).

CVE-2015-1798: The symmetric-key feature in the receive function in ntp_proto.c in ntpd in NTP required a correct MAC only if the MAC field has a nonzero length, which made it easier for man-in-the-middle attackers to spoof packets by omitting the MAC (bsc#924202).

CVE-2015-1799: The symmetric-key feature in the receive function in ntp_proto.c in ntpd in NTP performed state-variable updates upon receiving certain invalid packets, which made it easier for man-in-the-middle attackers to cause a denial of service (synchronization loss) by spoofing the source IP address of a peer (bsc#924202).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - The rate limiting feature in NTP 4.x before 4.2.8p4 and     4.3.x before 4.3.77 allows remote attackers to have     unspecified impact via a large number of crafted     requests.

  - Mitigation:Do not add the 'limited' configuration     option to any restrict lines in the ntp.conf     file.(CVE-2015-7705)

  - The protocol engine in ntp 4.2.6 before 4.2.8p11 allows     a remote attackers to cause a denial of service     (disruption) by continually sending a packet with a     zero-origin timestamp and source IP address of the     'other side' of an interleaved association causing the     victim ntpd to reset its association(CVE-2018-7185)

  - The ntpq saveconfig command in NTP 4.1.2, 4.2.x before     4.2.8p6, 4.3, 4.3.25, 4.3.70, and 4.3.77 does not     properly filter special characters, which allows     attackers to cause unspecified impact via a crafted     filename.(CVE-2015-7976)

  - ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before     4.3.77 allows remote authenticated users to cause a     denial of service (infinite loop or crash) by pointing     the key file at the log file.

  - Mitigation:Disable NTP remote configuration or limit     this feature to trusted users to effectively mitigate     this risk(CVE-2015-7850)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for ntp fixes the following issues :

  - Update to 4.2.8p7 (boo#977446) :

  - CVE-2016-1547, boo#977459: Validate crypto-NAKs, AKA:
    CRYPTO-NAK DoS.

  - CVE-2016-1548, boo#977461: Interleave-pivot

  - CVE-2016-1549, boo#977451: Sybil vulnerability:
    ephemeral association attack.

  - CVE-2016-1550, boo#977464: Improve NTP security against     buffer comparison timing attacks.

  - CVE-2016-1551, boo#977450: Refclock impersonation     vulnerability

  - CVE-2016-2516, boo#977452: Duplicate IPs on unconfig     directives will cause an assertion botch in ntpd.

  - CVE-2016-2517, boo#977455: remote configuration     trustedkey/ requestkey/controlkey values are not     properly validated.

  - CVE-2016-2518, boo#977457: Crafted addpeer with hmode >     7 causes array wraparound with MATCH_ASSOC.

  - CVE-2016-2519, boo#977458: ctl_getitem() return value     not always checked.

  - integrate ntp-fork.patch

  - Improve the fixes for: CVE-2015-7704, CVE-2015-7705,     CVE-2015-7974

  - Restrict the parser in the startup script to the first     occurrance of 'keys' and 'controlkey' in ntp.conf     (boo#957226).

  - Enable compile-time support for MS-SNTP     (--enable-ntp-signd). This replaces the w32 patches in     4.2.4 that added the authreg directive. (fate#320758).

  - Fix ntp-sntp-dst.patch (boo#975496).

  - Call /usr/sbin/sntp with full path to synchronize in     start-ntpd. When run as cron job, /usr/sbin/ is not in     the path, which caused the synchronization to fail.
    (boo#962318)

  - Speedup ntpq (boo#782060, ntp-speedup-ntpq.patch).

  - Sync service files with openSUSE Factory.

  - Fix the TZ offset output of sntp during DST     (boo#951559).

  - Add ntp-fork.patch and build with threads disabled to     allow name resolution even when running chrooted.

  - Update to 4.2.8p6 :

  - CVE-2015-8158, boo#962966: Potential Infinite Loop in     ntpq.

  - CVE-2015-8138, boo#963002: origin: Zero Origin Timestamp     Bypass.

  - CVE-2015-7979, boo#962784: Off-path Denial of Service     (DoS) attack on authenticated broadcast mode.

  - CVE-2015-7978, boo#963000: Stack exhaustion in recursive     traversal of restriction list.

  - CVE-2015-7977, boo#962970: reslist NULL pointer     dereference.

  - CVE-2015-7976, boo#962802: ntpq saveconfig command     allows dangerous characters in filenames.

  - CVE-2015-7975, boo#962988: nextvar() missing length     check.

  - CVE-2015-7974, boo#962960: Skeleton Key: Missing key     check allows impersonation between authenticated peers.

  - CVE-2015-7973, boo#962995: Deja Vu: Replay attack on     authenticated broadcast mode.

  - CVE-2015-8140: ntpq vulnerable to replay attacks.

  - CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose     origin.

  - CVE-2015-5300, boo#951629: Small-step/Big-step.

  - Add /var/db/ntp-kod (boo#916617).

  - Add ntp-ENOBUFS.patch to limit a warning that might     happen quite a lot on loaded systems (boo#956773).

  - add ntp.bug2965.diff (boo#954982)

  - fixes regression in 4.2.8p4 update

  - Update to 4.2.8p4 to fix several security issues     (boo#951608) :

  - CVE-2015-7871: NAK to the Future: Symmetric association     authentication bypass via crypto-NAK

  - CVE-2015-7855: decodenetnum() will ASSERT botch instead     of returning FAIL on some bogus values

  - CVE-2015-7854: Password Length Memory Corruption     Vulnerability

  - CVE-2015-7853: Invalid length data provided by a custom     refclock driver could cause a buffer overflow

  - CVE-2015-7852 ntpq atoascii() Memory Corruption     Vulnerability

  - CVE-2015-7851 saveconfig Directory Traversal     Vulnerability

  - CVE-2015-7850 remote config logfile-keyfile

  - CVE-2015-7849 trusted key use-after-free

  - CVE-2015-7848 mode 7 loop counter underrun

  - CVE-2015-7701 Slow memory leak in CRYPTO_ASSOC

  - CVE-2015-7703 configuration directives 'pidfile' and     'driftfile' should only be allowed locally

  - CVE-2015-7704, CVE-2015-7705 Clients that receive a KoD     should validate the origin timestamp field

  - CVE-2015-7691, CVE-2015-7692, CVE-2015-7702 Incomplete     autokey data packet length checks

  - obsoletes ntp-memlock.patch.

  - Add a controlkey line to /etc/ntp.conf if one does not     already exist to allow runtime configuuration via ntpq.

  - Temporarily disable memlock to avoid problems due to     high memory usage during name resolution (boo#946386,     ntp-memlock.patch).

  - Use SHA1 instead of MD5 for symmetric keys (boo#905885).

  - Improve runtime configuration :

  - Read keytype from ntp.conf

  - Don't write ntp keys to syslog.

  - Fix legacy action scripts to pass on command line     arguments.

  - Remove ntp.1.gz, it wasn't installed anymore.

  - Remove ntp-4.2.7-rh-manpages.tar.gz and only keep     ntptime.8.gz. The rest is partially irrelevant,     partially redundant and potentially outdated     (boo#942587).

  - Remove 'kod' from the restrict line in ntp.conf     (boo#944300).

  - Use ntpq instead of deprecated ntpdc in start-ntpd     (boo#936327).

  - Add a controlkey to ntp.conf to make the above work.

  - Don't let 'keysdir' lines in ntp.conf trigger the 'keys'     parser.

  - Disable mode 7 (ntpdc) again, now that we don't use it     anymore.

  - Add 'addserver' as a new legacy action.

  - Fix the comment regarding addserver in ntp.conf     (boo#910063).

  - Update to version 4.2.8p3 which incorporates all     security fixes and most other patches we have so far     (fate#319040). More information on:
    http://archive.ntp.org/ntp4/ChangeLog-stable

  - Disable chroot by default (boo#926510).

  - Enable ntpdc for backwards compatibility (boo#920238).

  - Security fix: ntp-keygen may generate non-random     symmetric keys

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
92485	GLSA-201607-15 : NTP: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	2016/7/21	2026/1/30	critical
90820	SUSE SLES11 Security Update : ntp (SUSE-SU-2016:1175-1)	Nessus	SuSE Local Security Checks	2016/5/2	2021/1/19	high
106499	pfSense < 2.3 Multiple Vulnerabilities (SA-16_01 - SA-16_02)	Nessus	Firewalls	2018/1/31	2025/10/30	critical
88054	Network Time Protocol Daemon (ntpd) 3.x / 4.x < 4.2.8p6 Multiple Vulnerabilities	Nessus	Misc.	2016/1/21	2025/2/18	medium
88068	FreeBSD : ntp -- multiple vulnerabilities (5237f5d7-c020-11e5-b397-d050996490d0)	Nessus	FreeBSD Local Security Checks	2016/1/22	2021/1/4	high
90991	SUSE SLED12 / SLES12 Security Update : ntp (SUSE-SU-2016:1247-1)	Nessus	SuSE Local Security Checks	2016/5/9	2021/1/6	critical
91248	SUSE SLES11 Security Update : ntp (SUSE-SU-2016:1311-1)	Nessus	SuSE Local Security Checks	2016/5/19	2021/1/19	critical
93896	Ubuntu 14.04 LTS / 16.04 LTS : NTP vulnerabilities (USN-3096-1)	Nessus	Ubuntu Local Security Checks	2016/10/6	2025/9/3	high
219044	Linux Distros Unpatched Vulnerability : CVE-2015-7976	Nessus	Misc.	2025/3/4	2025/9/4	medium
88912	Slackware 13.0 / 13.1 / 13.37 / 14.0 / 14.1 / current : ntp (SSA:2016-054-04)	Nessus	Slackware Local Security Checks	2016/2/24	2021/1/14	high
90821	SUSE SLED12 / SLES12 Security Update : ntp (SUSE-SU-2016:1177-1)	Nessus	SuSE Local Security Checks	2016/5/2	2021/1/6	high
93186	SUSE SLES10 Security Update : ntp (SUSE-SU-2016:1912-1)	Nessus	SuSE Local Security Checks	2016/8/29	2026/1/27	critical
124450	EulerOS 2.0 SP5 : ntp (EulerOS-SA-2019-1323)	Nessus	Huawei Local Security Checks	2019/5/1	2024/5/30	critical
91403	openSUSE Security Update : ntp (openSUSE-2016-649)	Nessus	SuSE Local Security Checks	2016/6/1	2021/1/19	critical

检测

插件搜索

critical

high

critical

medium

high

critical

critical

high

medium

high

high

critical

critical

critical