The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the CIQ ciqsa-2026_1435 advisory.

    This advisory aggregates security fixes for the kernel SRPM in CIQ FIPS 9.6 Compliant. It addresses 16     CVEs: CVE-2026-46181, CVE-2026-23191, CVE-2026-43329, CVE-2026-46176, CVE-2026-43499, and 11 more.

Tenable has extracted the preceding description block directly from the CIQ security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1783791447 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot     reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED     indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but     device_register() was called In case of device_register() has been called we should call put_device() to     correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of     MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_     calling device_register(), because put_device() should be called even in case of device_register()     failure. (CVE-2021-47416)

  - An out-of-bounds read flaw was found in the Linux kernel's TeleTYpe subsystem. The issue occurs in how a     user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage     of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read     unauthorized random data from memory. (CVE-2022-1462)

  - In the Linux kernel, the following vulnerability has been resolved: can: isotp: sanitize CAN ID checks in     isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached     with a compliant CAN ID address configuration. The provided address information consisted of CAN ID     0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the     SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling     printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print     failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter     logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in     kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on     the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred()     is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so     that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following     lockdep error: ====================================================== WARNING: possible circular locking     dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752     [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470     kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2},     at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing     dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave     include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50     kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80     drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0     drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827     [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220     drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200     drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156     [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110     [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159     serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00     kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084     register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46     drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915     start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 ->     #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734     console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - In the Linux kernel, the following vulnerability has been resolved: list: fix a data-race around     ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is     empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to     avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless     ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait())     made some ep_events_available() calls lockless and added single call under a lock, finally commit     e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available()     lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by     task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init     include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events     fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40     fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281     [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80     fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0     arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes     by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available     fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40     fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281     [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80     fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0     arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 ->     0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS     Google 01/01/2011 (CVE-2022-49443)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS-STREAM8:CLSA-2026:1783790425 advisory.

  - A flaw in netfilter could allow a network-connected attacker to infer openvpn connection endpoint     information for further use in traditional network attacks. (CVE-2021-3773)

  - A flaw was found in the Linux kernel implementation of proxied virtualized TPM devices. On a system where     virtualized TPM devices are configured (this is not the default) a local attacker can create a use-after-     free and create a situation where it may be possible to escalate privileges on the system. (CVE-2022-2977)

  - In the Linux kernel, the following vulnerability has been resolved: tracing: Free buffers when a used     dynamic event is removed After 65536 dynamic events have been added and removed, the type field of the     event then uses the first type number that is available (not currently used by other events). A type     number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to     logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced     and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be     created and destroyed), if another dynamic event is created that has the same number that new event's     logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash     the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2     $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will     remove the old event and create a new one (with the same format) and increase the type number to the next     available on until the type number reaches over 65535 which is the max number for the 16 bit type. After     it reaches that number, the logic to allocate a new number simply looks for the next available number.
    When an dynamic event is removed, that number is then available to be reused by the next dynamic event     created. That is, once the above reaches the max number, the number assigned to the event in that loop     will remain the same. Now that means deleting one dynamic event and created another will reuse the     previous events type number. This is where bad things can happen. After the above loop finishes, the     kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 >     kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and     create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' >     kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo:
    (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240)     arg1=     cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240)     arg1=     cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240)     arg1=     cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240)     arg1= ---truncated--- (CVE-2022-49006)

  - In the Linux kernel, the following vulnerability has been resolved: tpm: fix reference counting for struct     tpm_chip The following sequence of operations results in a refcount warning: 1. Open device /dev/tpmrm. 2.
    Remove module tpm_tis_spi. 3. Write a TPM command to the file descriptor opened at step 1. ------------[     cut here ]------------ WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4 refcount_t:
    addition on 0; use-after-free. Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac     sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc     snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm     snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835] CPU: 3 PID: 1161 Comm: hold_open     Not tainted 5.10.0ls-main-dirty #2 Hardware name: BCM2711 [<c0410c3c>] (unwind_backtrace) from     [<c040b580>] (show_stack+0x10/0x14) [<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)     [<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108) [<c0445a30>] (__warn) from [<c0445aa8>]     (warn_slowpath_fmt+0x74/0xb8) [<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)     [<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm]) [<bf0a715c>]     (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm]) [<bf0a7d6c>]     (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0) [<c05a7ac0>] (vfs_write) from     [<c05a7ee4>] (ksys_write+0x58/0xcc) [<c05a7ee4>] (ksys_write) from [<c04001a0>]     (ret_fast_syscall+0x0/0x4c) Exception stack(0xc226bfa8 to 0xc226bff0) bfa0: 00000000 000105b4 00000003     beafe664 00000014 00000000 bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684     bfe0: 0000006c beafe648 0001056c b6eb6944 ---[ end trace d4b8409def9b8b1f ]--- The reason for this warning     is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is     already zero. Since commit 8979b02aaf1d (tpm: Fix reference count to main device) the extra reference     used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is     never set. Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to     tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2.
    Commit fdc915f7f719 (tpm: expose spaces via a device link /dev/tpmrm<n>) already introduced function     tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs     that results in the call of this function. Fix this by putting chip->devs in tpm_chip_unregister().
    Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks     for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases. (CVE-2022-49287)

  - In the Linux kernel, the following vulnerability has been resolved: tracing: Fix wild-memory-access in     register_synth_event() In register_synth_event(), if set_synth_event_print_fmt() failed, then both     trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call     will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-     memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove     if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event
    __unregister_trace_event (second call) Fix the bug by avoiding to call the second
    __unregister_trace_event() by checking if the first one is called. general protection fault, probably for     non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range     [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted     6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS     rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code:
    00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08     4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP:
    0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000     RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08:
    0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122     R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000)     GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000     DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK>
    __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250     synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test]     synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480     do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0     do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2022-49799)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
354642	Rocky Linux 9.6 [CIQ] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ciqsa-2026_1435)	Nessus	Rocky Linux Local Security Checks	2026/10/1	2026/10/23	high
352871	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1783791447)	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/22	low
352893	CentOS Linux 8 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS-STREAM8:CLSA-2026:1783790425)	Nessus	CentOS Local Security Checks	2026/9/30	2026/10/20	critical
340680	Ubuntu 24.04 LTS / Pro Realtime 24.04 LTS : Linux kernel (Raspberry Pi) vulnerabilities (USN-8665-1)	Nessus	Ubuntu Local Security Checks	2026/8/26	2026/11/11	high
313522	Amazon Linux 2023 : bpftool, kernel, kernel-devel (ALAS2023-2026-1681)	Nessus	Amazon Linux Local Security Checks	2026/5/9	2026/9/1	high
324048	SUSE SLED15 / SLES15 : Security update for the Linux Kernel (SUSE-SU-2026:2238-1)	Nessus	SuSE Local Security Checks	2026/7/1	2026/10/29	high

检测

插件搜索

high

low

critical

high

high

high