因此，该软件受到 ALAS2023-2025-1054 公告中提及的多个漏洞影响。

    在 Linux 内核流量控制 (TC) 子系统中发现缺陷。使用特定网络配置（使用 TC 操作镜像将出口数据包重定向到入口）时，本地非特权用户可在使用中的传输协议（TCP 或 SCTP）进行重新传输时触发 CPU 软锁定（ABBA 死锁），从而导致拒绝服务条件。(CVE-2022-4269)

    在 Linux 内核的 io_uring/filetable.c 的 io_file_bitmap_get 中发现一个空指针取消引用。 (CVE-2023-1583)

    在 Linux 内核中发现，btrfs 中 fs/btrfs/ctree.c 的 btrfs_search_slot 存在释放后使用缺陷。攻击者可利用此缺陷导致系统崩溃，并可能造成内核信息泄漏 (CVE-2023-1611)

    在 Linux 内核的 SLIMpro I2C 设备驱动程序中发现越界写入漏洞。userspace data->block[0] 变量的上限未限定为 0-255 之间的数字，因而可将它用作 memcpy 的大小，这可能导致写入超出 dma_buffer 的末尾。有权限的本地用户可借此造成系统崩溃，或可能实现代码执行。(CVE-2023-2194)

    在 Linux 内核中，以下漏洞已修复：

    dm stats：检查并传递 alloc_percpu 失败情况 (CVE-2023-53044)

    在 Linux 内核中，以下漏洞已修复：

    dm crypt：将 cond_resched() 添加到 dmcrypt_write() (CVE-2023-53051)

    在 Linux 内核中，以下漏洞已修复：

    erspan不使用 ndo_start_xmit() 中的 skb_mac_header()CVE-2023-53053]

    在 Linux 内核中，以下漏洞已修复：

    fscryptsecurity_sb_delete() 之后破坏 keyring (CVE-2023-53055)

    在 Linux 内核中，以下漏洞已修复：

    igb：恢复造成死锁的 rtnl_lock() (CVE-2023-53060)

    在 Linux 内核中，以下漏洞已修复：

    perf/core修复 perf_event_bpf_output 中错误的 perf_output_begin 参数调用 (CVE-2023-53065)

    在 Linux 内核中，以下漏洞已修复：

    mptcp使用工作队列破坏不接受的套接字 (CVE-2023-53072)

    在 Linux 内核中，以下漏洞已修复：

    perf/x86/amd/core始终清除 idx 的状态 (CVE-2023-53073)

    在 Linux 内核中，以下漏洞已修复：

    xsk在 xdp_umem_reg 中添加缺少的溢出检查 (CVE-2023-53080)

    在 Linux 内核中，以下漏洞已修复：

    nfsd如果rq_pages 中的页面是上一页的延续则不替换该页面 (CVE-2023-53083)

    在 Linux 内核中，以下漏洞已修复：

    mptcp修复侦听器关闭中的 UaF (CVE-2023-53088)

    在 Linux 内核中，以下漏洞已修复：

    tracing不让直方图值具有某些修饰符 (CVE-2023-53093)

    在 Linux 内核中，以下漏洞已修复：

    cifs修复无 CONFIG_CIFS_DFS_UPCALL 时的 DFS 遍历 oops (CVE-2023-53246)

    在 Linux 内核中，以下漏洞已修复：

    btrfs修复使用 scrub 重定位期间中止事务时的死锁 (CVE-2023-53348)

    在 Linux 内核中，以下漏洞已修复：

    drm/i915/dpt将 DPT BO 视为帧缓冲区 (CVE-2023-53378)

    在 Linux 内核中，以下漏洞已修复：

    xfrm转储 algos 和 encap 时的零填充 (CVE-2023-53684)

    在 Linux 内核中，以下漏洞已修复：

    net/net_failover修复 txq 超出警告 (CVE-2023-54236)

Tenable 已直接从测试产品的安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2026：1783791447公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. (CVE-2021-47416)

  - 在 Linux 内核的 TeleTYpe 子系统中发现越界读取缺陷。在 flush_to_ldisc 函数中存在内存泄漏时，用户使用 ioctls TIOCSPTLCK 和 TIOCGPTPEER 以及 TIOCSTI 和 TCXONC 触发争用条件时会发生此问题。此缺陷会让本地用户导致系统崩溃或从内存读取未经授权的随机数据。 (CVE-2022-1462)

  - 已修复 Linux 内核中的下列漏洞：can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - 已修复 Linux 内核中的下列漏洞：tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ----
    ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key);
    lock(&port->lock); lock(console_owner); As commit dbdda842fe96 (printk: Add console owner and waiter logic to load balance console writes) said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted
    ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock:
    ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
    tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key);
    call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
    vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- (CVE-2022-49441)

  - 已修复 Linux 内核中的下列漏洞：list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

因此，该软件受到 ALAS2023-2023-160 公告中提及的多个漏洞影响。

    在 Linux 内核流量控制 (TC) 子系统中发现缺陷。使用特定网络配置（使用 TC 操作镜像将出口数据包重定向到入口）时，本地非特权用户可在使用中的传输协议（TCP 或 SCTP）进行重新传输时触发 CPU 软锁定（ABBA 死锁），从而导致拒绝服务条件。(CVE-2022-4269)

    在 Linux 内核的 io_uring/filetable.c 的 io_file_bitmap_get 中发现一个空指针取消引用。 (CVE-2023-1583)

    在 Linux 内核中发现，btrfs 中 fs/btrfs/ctree.c 的 btrfs_search_slot 存在释放后使用缺陷。攻击者可利用此缺陷导致系统崩溃，并可能造成内核信息泄漏 (CVE-2023-1611)

    在 Linux 内核的 SLIMpro I2C 设备驱动程序中发现越界写入漏洞。userspace data->block[0] 变量的上限未限定为 0-255 之间的数字，因而可将它用作 memcpy 的大小，这可能导致写入超出 dma_buffer 的末尾。有权限的本地用户可借此造成系统崩溃，或可能实现代码执行。(CVE-2023-2194)

    在 Linux 内核中，以下漏洞已修复：

    dm crypt将 cond_resched() 添加到 dmcrypt_write() (CVE-2023-53051)

    在 Linux 内核中，以下漏洞已修复：

    erspan不使用 ndo_start_xmit() 中的 skb_mac_header()CVE-2023-53053]

    在 Linux 内核中，以下漏洞已修复：

    perf/x86/amd/core始终清除 idx 的状态 (CVE-2023-53073)

    在 Linux 内核中，以下漏洞已修复：

    xsk在 xdp_umem_reg 中添加缺少的溢出检查 (CVE-2023-53080)

    在 Linux 内核中，以下漏洞已修复：

    nfsd如果rq_pages 中的页面是上一页的延续则不替换该页面 (CVE-2023-53083)

    在 Linux 内核中，以下漏洞已修复：

    tracing不让直方图值具有某些修饰符 (CVE-2023-53093)

Tenable 已直接从测试产品的安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

AlmaLinux 9.6 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.6：CLSA-2026：1786824415公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. (CVE-2022-48938)

  - 已修复 Linux 内核中的下列漏洞：pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map Here is the BUG report by KASAN about null pointer dereference: BUG:
    KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer.
    (CVE-2022-49832)

  - 已修复 Linux 内核中的下列漏洞：hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Syzkaller reports a null-ptr-deref bug as follows:
    ====================================================== KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380 [...] Call Trace: <TASK> vfs_parse_fs_param fs/fs_context.c:148 [inline] vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129 vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191 generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231 do_new_mount fs/namespace.c:3036 [inline] path_mount+0x12de/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> ====================================================== According to commit vfs: parse: deal with zero length string value, kernel will set the param->string to null pointer in vfs_parse_fs_string() if fs string has zero length. Yet the problem is that, hugetlbfs_parse_param() will dereference the param->string, without checking whether it is a null pointer. To be more specific, if hugetlbfs_parse_param() parses an illegal mount parameter, such as size=,, kernel will constructs struct fs_parameter with null pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug. This patch solves it by adding sanity check on param->string in hugetlbfs_parse_param(). (CVE-2022-50334)

  - 已修复 Linux 内核中的下列漏洞：Input: cyapa - add missing input core locking to suspend/resume functions Grab input->mutex during suspend/resume functions like it is done in other input drivers. This fixes the following warning during system suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm:
    kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue:
    events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- (CVE-2023-52884)

  - 已修复 Linux 内核中的下列漏洞：tracing: Do not let histogram values have some modifiers Histogram values can not be strings, stacktraces, graphs, symbols, syscalls, or grouped in buckets or log. Give an error if a value is set to do so. Note, the histogram code was not prepared to handle these modifiers for histograms and caused a bug. Mark Rutland reported: # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 143.695190] Mem abort info: [ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04: level 0 translation fault [ 143.702381] Data abort info: [ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] Modules linked in: [ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] Hardware name: linux,dummy-virt (DT) [ 143.706723] pstate:
    80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc :
    hist_field_name.part.0+0x14/0x140 [ 143.707504] lr : hist_field_name.part.0+0x104/0x140 [ 143.707774] sp :
    ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23:
    ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001 [ 143.709127] x20: ffff10d303ec2000 x19:
    0000000000000000 x18: 0000000000000000 [ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15:
    0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 :
    000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 :
    ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 :
    0000000000000000 [ 143.711746] Call trace: [ 143.712115] hist_field_name.part.0+0x14/0x140 [ 143.712642] hist_field_name.part.0+0x104/0x140 [ 143.712925] hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174/0x4d0 [ 143.713348] hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[ end trace 0000000000000000 ]--- Segmentation fault (CVE-2023-53093)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - 跟踪不让直方图值具有某些修饰符 直方图值不能是字符串、堆栈跟踪、图形、符号、系统调用也不能在存储段或日志中分组。如果将值设置为这样做则发生错误。请注意直方图代码未准备好处理这些直方图修饰符并造成一个缺陷。Mark Rutland 报告了 # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/ kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] 无法处理虚拟地址 0000000000000000 处的内核空指针取消引用 [ 143.695190] Mem 中止信息[ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25DABT当前 EL, IL = 32 位 [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04级别 0 转换错误 [ 143.702381] Data 中止信息[ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48 -bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] 内部错误Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] 中链接的模块[ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] 硬件名称 linux,dummy-virt (DT) [ 143.706723] pstate
    80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc
    Hist_field_name.part.0+0x14/0x140 [ 143.707504] lr Hist_field_name.part.0+0x104/0x140 [ 143.707774] sp
    ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23:
    ffffd7a6539b27b0 x22ffff10d303fb8c00 x210000000000000001 [ 143.709127] x20ffff10d303ec2000 x19
    0000000000000000 x180000000000000000 [ 143.709478] x17000000000000000 x160000000000000000 x15
    0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 :
    000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 :
    ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1: 0000000000000001 x0
    0000000000000000 [ 143.711746] 调用跟踪[ 143.712115] Hist_field_name.part.0+0x14/0x140 [ 143.712642] Hist_field_name.part.0+0x104/0x140 [ 143.712925] Hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174 /0x4d0 [ 143.713348] Hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [143.715742] 代码a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[结束跟踪 0000000000000000]CVE-2023-53093分段错误]

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

Rocky Linux 9.6 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.6：CLSA-2026：2026：1786824415 公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. (CVE-2022-48938)

  - 已修复 Linux 内核中的下列漏洞：pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map Here is the BUG report by KASAN about null pointer dereference: BUG:
    KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer.
    (CVE-2022-49832)

  - 已修复 Linux 内核中的下列漏洞：hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Syzkaller reports a null-ptr-deref bug as follows:
    ====================================================== KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380 [...] Call Trace: <TASK> vfs_parse_fs_param fs/fs_context.c:148 [inline] vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129 vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191 generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231 do_new_mount fs/namespace.c:3036 [inline] path_mount+0x12de/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> ====================================================== According to commit vfs: parse: deal with zero length string value, kernel will set the param->string to null pointer in vfs_parse_fs_string() if fs string has zero length. Yet the problem is that, hugetlbfs_parse_param() will dereference the param->string, without checking whether it is a null pointer. To be more specific, if hugetlbfs_parse_param() parses an illegal mount parameter, such as size=,, kernel will constructs struct fs_parameter with null pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug. This patch solves it by adding sanity check on param->string in hugetlbfs_parse_param(). (CVE-2022-50334)

  - 已修复 Linux 内核中的下列漏洞：Input: cyapa - add missing input core locking to suspend/resume functions Grab input->mutex during suspend/resume functions like it is done in other input drivers. This fixes the following warning during system suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm:
    kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue:
    events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- (CVE-2023-52884)

  - 已修复 Linux 内核中的下列漏洞：tracing: Do not let histogram values have some modifiers Histogram values can not be strings, stacktraces, graphs, symbols, syscalls, or grouped in buckets or log. Give an error if a value is set to do so. Note, the histogram code was not prepared to handle these modifiers for histograms and caused a bug. Mark Rutland reported: # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 143.695190] Mem abort info: [ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04: level 0 translation fault [ 143.702381] Data abort info: [ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] Modules linked in: [ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] Hardware name: linux,dummy-virt (DT) [ 143.706723] pstate:
    80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc :
    hist_field_name.part.0+0x14/0x140 [ 143.707504] lr : hist_field_name.part.0+0x104/0x140 [ 143.707774] sp :
    ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23:
    ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001 [ 143.709127] x20: ffff10d303ec2000 x19:
    0000000000000000 x18: 0000000000000000 [ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15:
    0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 :
    000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 :
    ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 :
    0000000000000000 [ 143.711746] Call trace: [ 143.712115] hist_field_name.part.0+0x14/0x140 [ 143.712642] hist_field_name.part.0+0x104/0x140 [ 143.712925] hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174/0x4d0 [ 143.713348] hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[ end trace 0000000000000000 ]--- Segmentation fault (CVE-2023-53093)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
241778	Amazon Linux 2023：bpftool、kernel、kernel-devel (ALAS2023-2025-1054)	Nessus	Amazon Linux Local Security Checks	2025/7/10	2026/2/9	high
352871	AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / 等多个漏洞（ALMALINUX9.2：CLSA-2026：1783791447）	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/1	medium
174575	Amazon Linux 2023：bpftool、kernel、kernel-devel (ALAS2023-2023-160)	Nessus	Amazon Linux Local Security Checks	2023/4/20	2026/2/24	high
359602	AlmaLinux 9.6 [TuxCare] 安全更新：kernel / kernel-abi-stablelists / kernel-core / 等多个漏洞（ALMALINUX9.6：CLSA-2026：1786824415）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/1	critical
247148	Linux Distros 未修补的漏洞：CVE-2023-53093	Nessus	Misc.	2025/8/10	2026/9/30	medium
359751	Rocky Linux 9.6 [TuxCare] 安全更新：kernel / kernel-abi-stablelists / kernel-core / 等多个漏洞（ALMALINUX9.6：CLSA-2026：1786824415）	Nessus	Rocky Linux Local Security Checks	2026/10/1	2026/10/1	critical

检测

插件搜索

high

medium

high

critical

medium

critical