Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - ALSA：usb-audio：检查解析 Scarlett2 混合器接口时的端点编号 传递畸形 USB 描述符时，USB-audio 驱动程序中的 Scarlett2 混音器 quirk 可能发生空取消引用，因为它假设 scarlett2_find_fc_interface（） 中的解析接口中存在端点，正如 fuzzer 所报告的那样。为避免空取消引用，只需添加 bNumEndpoints 的健全性检查并跳过无效接口。（CVE-2026-43436）

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

Rocky Linux 9.6 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.6：CLSA-2026：2026：1780562693公告中提及的多个漏洞的影响。

  - 在低于 5.16.12 版本的 Linux 内核中发现一个问题。drivers/net/usb/sr9700.c 允许攻击者通过设备中构建的帧长度从堆内存获取敏感信息。(CVE-2022-26966)

  - 已修复 Linux 内核中的下列漏洞：kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k
    __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r
    __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table.
    Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this.
    aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list :
    show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop :
    warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at
    __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130
    __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm:
    execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP:
    0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10:
    0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated--- (CVE-2022-50008)

  - 已修复 Linux 内核中的下列漏洞：tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28;
    int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51;
    int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63 >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm==bash' >> \ events/sched/sched_waking/trigger # echo hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid) >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU:
    2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09:
    0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3:
    0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX:
    0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09:
    0000000000000142 R ---truncated--- (CVE-2022-50553)

  - 已修复 Linux 内核中的下列漏洞：net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done (CVE-2023-52887)

  - 已修复 Linux 内核中的下列漏洞：net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b (eth: sungem: remove .ndo_poll_controller to avoid deadlocks). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. (CVE-2024-38553)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2026：1783362244公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：extcon: Modify extcon device to be created after driver data is set Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace.
    Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read) [<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read) [<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read) [<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read) [<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read) [<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read) [<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return) (CVE-2022-49308)

  - 已修复 Linux 内核中的下列漏洞：tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade.
    Commit 28438794aba4 (modpost: fix section mismatch check for exported init/exit sections) fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost:
    vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable
    __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. (CVE-2022-49675)

  - 已修复 Linux 内核中的下列漏洞：ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. (CVE-2022-49731)

  - 已修复 Linux 内核中的下列漏洞：bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm ip, pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace:
    [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (CVE-2022-49812)

  - 已修复 Linux 内核中的下列漏洞：capabilities: fix potential memleak on error path from vfs_getxattr_alloc() In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |--
    *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. [PM: subject line and backtrace tweaks] (CVE-2022-49890)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

AlmaLinux 9.6 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.6：CLSA-2026：1780562693 2公告中提及的多个漏洞的影响。

  - 在低于 5.16.12 版本的 Linux 内核中发现一个问题。drivers/net/usb/sr9700.c 允许攻击者通过设备中构建的帧长度从堆内存获取敏感信息。(CVE-2022-26966)

  - 已修复 Linux 内核中的下列漏洞：kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k
    __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r
    __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table.
    Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this.
    aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list :
    show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop :
    warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at
    __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130
    __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm:
    execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP:
    0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10:
    0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated--- (CVE-2022-50008)

  - 已修复 Linux 内核中的下列漏洞：tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28;
    int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51;
    int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63 >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm==bash' >> \ events/sched/sched_waking/trigger # echo hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid) >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU:
    2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09:
    0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3:
    0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX:
    0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09:
    0000000000000142 R ---truncated--- (CVE-2022-50553)

  - 已修复 Linux 内核中的下列漏洞：net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done (CVE-2023-52887)

  - 已修复 Linux 内核中的下列漏洞：net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b (eth: sungem: remove .ndo_poll_controller to avoid deadlocks). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. (CVE-2024-38553)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

远程 Oracle Linux 10 / 9 主机上安装的多个程序包受到 ELSA-2026-50372 公告中提及的多个漏洞影响。

    - net/sched：修复导致页面缓存损坏的 pedit 部分 COW(Rajat Gupta) {CVE-2026-46331}
    - eventpoll：修复ep_remove结构 eventpoll / 结构文件 UAF （Christian Brauner） [Orabug： 39668743] {CVE-2026-46242}
    - net：skbuff：修复pskb_carve帮助程序中缺少的 zerocopy 引用 （Minh Nguyen） [Orabug： 39656679] {CVE-2026-52943}
    - arm64：勘误表：缓解各种 Arm CPU 上的 TLBI 勘误表 （Mark Rutland） [Orabug： 39548792] {CVE-2025-10263}
    - openvswitch： vport：修复释放隧道端口时的自死锁 （Ilya Maximets） {CVE-2026-46165}
    - iommu/amd：在并发 TLB 无效的情况下序列化序列分配 （Ankit Soni） {CVE-2026-43220}
    - usb：ulpi：修复 ulpi_register（） 错误路径中的内存泄漏 （Felix Gu） {CVE-2026-46109}
    - smb：客户端：拒绝用户空间 cifs.spnego 描述 （Asim Viladi Oglu Manizada） [Orabug： 39463671] {CVE-2026-46243}
    - net：skbuff：通过 frag-transfer 帮助程序传播 shared-frag 标记 (Hyunwoo Kim) [Orabug:
    39368826,39441323] {CVE-2026-43503，CVE-2026-46300}
    - net：skbuff：在合并期间保留 shared-frag 标记(William Bowling) [Orabug: 39368826] {CVE-2026-46300}
    - netfilter：拒绝 nft_bitwise 中的零位移 (Kai Ma) [Orabug: 39452464] {CVE-2026-46101}
    - net：ipv6：修复 seg6 和 rpl lwtunnels 中使用的 NOREF dst （Andrea Mayer） [Orabug： 39452457] {CVE-2026-46099}
    - ALSA：caiaq：修复探usb_dev故障时的 refcount 泄漏 （Deepanshu Kartikey） [Orabug： 39452739] {CVE-2026-46048}
    - ipv6：rpl：重新压缩的 SRH 增长时预留mac_len余量 （Greg Kroah-Hartman） [Orabug：39426003] {CVE-2026-43501}
    - ALSA：caiaq：修复错误路径中可能残留的ep1_in_urb （Takashi Iwai） [Orabug： 39452746] {CVE-2026-45992}
    - net: bonding：修复 bond_xmit_broadcast() 中的释放后使用(Xiang Mei) [Orabug: 39205989] {CVE-2026-31419}
    - crypto：authencesn - 拒绝实例创建期间的短 ahash 摘要 （Yucheng Lu） [Orabug： 39452231] {CVE-2026-46033}
    - spi：修复设备设置失败时的资源泄漏 （Johan Hovold） [Orabug： 39452400] {CVE-2026-46083}
    - net：qrtr：ns：限制节点总数 （Manivannan Sadhasivam） [Orabug：39452123] {CVE-2026-46003}
    - net：bridge：在 RCU 阅读器中使用稳定的 FDB dst 快照 （Zhengchuan Liang） [Orabug： 39452411] {CVE-2026-46086}
    - net：qrtr：ns：限制查询的最大次数 （Manivannan Sadhasivam） [Orabug: 39452207] {CVE-2026-46026}
    - net：qrtr：ns：限制每个节点的最大服务器注册节点数量 (Manivannan Sadhasivam) [Orabug: 39410851] {CVE-2026-43491}
    - RDMA/mana_ib：禁用 RSS QP 破坏时的 RX 转向 （Long Li） [Orabug： 39452406] {CVE-2026-46084}
    - media：rc：igorplugusb：注意一致性规则 （Oliver Neukum） [Orabug：39452432] {CVE-2026-46091}
    - wifi：mwifiex：修复 mwifiex_adapter_cleanup（） 中的释放后使用 （Daniel Hodges） [Orabug： 39452343] {CVE-2026-46069}
    - thermal：core：修复热区域调控器清理问题 （Rafael J. Wysocki） [Orabug： 39452186] {CVE-2026-46021}
    - smb：客户端：在 cifsacl 中重写 DACL 之前对其进行全面验证 (Michael Bommarito) [Orabug:
    39300611] {CVE-2026-31709}
    - scsi：sd：修复 device_add（&disk_dev） 失败时缺少的 put_disk（） （Yang Xiuwei） [Orabug： 39452100] {CVE-2026-45997}
    - rtmutex：在 remove_waiter（） 中使用 waiter：：task 而不是当前的任务 （Keenan Dong） [Orabug: 39425998] {CVE-2026-43499}
    - ceph：反哈希时仅 d_add（） 负 dentry （Max Kellermann） [Orabug： 39452291] {CVE-2026-46052}
    - dm mirror：修复 create_dirty_log（） 中的整数溢出 （Junrui Luo） [Orabug： 39452196] {CVE-2026-46023}
    - Bluetooth：hci_event：修复 SSP 通行密钥处理程序中潜在的 UAF (Shuvam Pandey) [Orabug: 39452304] {CVE-2026-46056}
    - tcp：监听器迁移后调用 sk_data_ready（） （Zhenzhong Wu） [Orabug： 39452159] {CVE-2026-46015}
    - inotify：修复 fsnotify_add_inode_mark_locked（） 失败时的监视计数泄漏 （Chia-Ming Chang） [Orabug：
    39452250] {CVE-2026-46040}
    - md/raid5：在访问日志元数据之前验证负载大小 （Junrui Luo） [Orabug： 39452349] {CVE-2026-46070}
    - md/raid5：修复 retry_aligned_read（） 中的软锁定 （Chia-Ming Chang） [Orabug： 39452287] {CVE-2026-46051}
    - ext4：修复 ext4_xattr_inode_dec_ref_all（） 中缺少的 brelse（） （Sohei Koyama） [Orabug： 39452269] {CVE-2026-46046}
    - ext4：修复 check_xattrs（） 中的边界检查以防止越界访问 （Deepanshu Kartikey） [Orabug：
    39452442] {CVE-2026-46094}
    - io_uring/poll：修复唤醒争用中缺少 EOF 的 multishot recv （Jens Axboe） {CVE-2026-23473}
    - KVM：nSVM：如果未处理的 VMMCALL 未被 L1 拦截则引发 #UD （Kevin Cheng） [Orabug： 39452372] {CVE-2026-46076}
    - KVM：SVM：如果 EFER，则为 INVLPGA 注入 #UD。SVME=0 （Kevin Cheng） [Orabug： 39452394] {CVE-2026-46082}
    - KVM：nSVM：在 L2 的 VMRUN 之后将中断阴影同步到缓存的 vmcb12 （Yosry Ahmed） [Orabug： 39452061] {CVE-2026-45987}
    - xfs：修复 xfs_alloc_buftarg（） 中的一个资源泄漏 （Haoxiang Li） [Orabug： 39452131] {CVE-2026-46005}
    - libceph：防止 ceph_handle_auth_reply（） 中潜在的 null-ptr-deref （Raphael Zimmer） [Orabug：
    39452201] {CVE-2026-46024}
    - ipv4：icmp：使用 icmp_pointers 之前验证回复类型 （Ruide Cao） [Orabug： 39452243] {CVE-2026-46037}
    - RDMA/rxe：在 rxe_rcv 中 payload_size（） 前验证 pad 和 ICRC （Hkbinbin） [Orabug： 39452259] {CVE-2026-46043}
    - net：qrtr：ns：ctrl_cmd_bye（） 期间释放节点 （Manivannan Sadhasivam） [Orabug： 39452246] {CVE-2026-46038}
    - rxrpc：修复 rxkad 加密未对齐处理 （David Howells） [Orabug： 39452728] {CVE-2026-46085}
    - ALSA：caiaq：正确处理探测错误 （Takashi Iwai） [Orabug：39452126] {CVE-2026-46004}
    - rbd：修复 device_add_disk（） 失败时的 null-ptr-deref （Dawei Feng） [Orabug： 39452385] {CVE-2026-46079}
    - md/raid10：通过检查操作和 nowait 请求修复死锁 （Josh Hunt） [Orabug： 39452284] {CVE-2026-46050}
    - jbd2：修复 jbd2_journal_cancel_revoke（） 中的死锁 （Zhang Yi） [Orabug： 39452318] {CVE-2026-46061}
    - erofs：修复尾随 dirents 的越界 nameoff 处理 （Gao Xiang） [Orabug： 39452380] {CVE-2026-46078}
    - ALSA：ctxfi：添加回退到 S/PDIF 的默认 RSR （Harin Lee） [Orabug： 39452280] {CVE-2026-46049}
    - ext2：拒绝 ext2_iget（） 中含零i_nlink和有效模式的 inode （Vasiliy Kovalev） [Orabug： 39452119] {CVE-2026-46002}
    - net：qrtr：ns：修复驱动程序 remove（） 中的释放后使用 （Manivannan Sadhasivam） [Orabug： 39452274] {CVE-2026-46047}
    - net：strparser：修复 strp_abort_strp（） 中的skb_head泄漏 （Luxiao Xu） [Orabug： 39452468] {CVE-2026-46102}
    - ALSA：control：在 snd_ctl_elem_init_enum_names（） 中的 strnlen（） 之前验证 buf_len （Ziqing Chen） [Orabug： 39452416] {CVE-2026-46088}
    - crypto： pcrypt - 修复MAY_BACKLOG请求的处理 （Herbert Xu） [Orabug： 39410863] {CVE-2026-43493}
    - wifi：rtw88：检查 PCI 上游桥是否存在 （Fedor Pchelkin） [Orabug： 39452437] {CVE-2026-46092}
    - zram：不忘记为部分丢弃请求执行 endio （Sergey Senozhatsky） [Orabug： 39452420] {CVE-2026-46089}
    - ocfs2：拆分 dio 完成中的事务以避免信用耗尽 （Heming Zhao） [Orabug： 39452388] {CVE-2026-46080}
    - drm/amdgpu：限制 BO 列表条目计数以防止资源耗尽 （Jesse Zhang） [Orabug： 39167551] {CVE-2026-23468}
    - padata：一劳永逸地修复 pd UAF （Herbert Xu） [Orabug： 38335055] {CVE-2025-38584}
    - drm/nouveau：修复 pushbuf 重定位边界检查中的 u32 溢出 （Greg Kroah-Hartman） [Orabug： 39452133] {CVE-2026-46006}
    - ALSA：usb-audio：停止以 MAX_NR_RATES 速率解析 UAC2 速率 （Cassio Gabriel） [Orabug： 39452170] {CVE-2026-46018}
    - drivers/xen/sys-hypervisor.c 中的缓冲区溢出 （Juergen Gross） [Orabug： 39305898] {CVE-2026-31786}
    - xen/privcmd：通过 VMA 拆分修复双重释放 （Juergen Gross） [Orabug： 39305908] {CVE-2026-31787}
    - rxrpc：修复非 XDR 密钥准备中缺失的票证长度验证 （Anderson Nascimento） [Orabug：
    39300563] {CVE-2026-31696}
    - crypto：ccp：如果 PSP 命令失败，请勿尝试将 ID 复制到用户空间 （Sean Christopherson） {CVE-2026-31697}
    - crypto：ccp：如果 PSP 命令失败，请勿尝试将 PDH cert 复制到用户空间 （Sean Christopherson） {CVE-2026-31698}
    - crypto：ccp：如果 PSP 命令失败，请勿尝试将 CSR 复制到用户空间 （Sean Christopherson） {CVE-2026-31699}
    - net/packet：修复 tpacket_snd（） 中的 mmap'd vnet_hdr 上的 TOCTOU 争用 （Bingquan Chen） {CVE-2026-31700}
    - ALSA：caiaq：在 create_card（） 中引用 USB 设备 （Berk Cem Goksel） [Orabug： 39300586] {CVE-2026-31701}
    - smb：客户端：修复smb2_ioctl_query_info QUERY_INFO路径中的 OOB 读取 （Michael Bommarito） [Orabug：
    39300607] {CVE-2026-31708}
    - smb：客户端：读取模式位之前需要完整 NFS 模式 SID （Michael Bommarito） [Orabug： 39343707] {CVE-2026-43350}
    - fuse：拒绝页面缓存中的超大问题 （Samuel Page） [Orabug： 39300556] {CVE-2026-31694}
    - mm/pagewalk：修复并发拆分和重错之间的争用 （Max Boone） [Orabug： 39250782] {CVE-2026-31456}
    - wifi：mac80211：ieee80211_tx_prepare_skb（） 失败时始终释放 skb （Felix Fietkau） [Orabug： 39167472] {CVE-2026-23444}
    - mm/userfaultfd：修复 hugetlb 错误互斥体哈希计算 （Jianhui Zhou） [Orabug： 39273453] {CVE-2026-31575}
    - ipv6：在 SRv6 路径中添加对 idev 的空检查 （Heminhong） [Orabug： 39167467] {CVE-2026-23442}
    - ocfs2：修复 ocfs2_write_end_inline 中的越界写入 （Joseph Qi） [Orabug： 39331090] {CVE-2026-43075}
    - ocfs2：在 inode 读取期间验证内联数据i_size （Deepanshu Kartikey） [Orabug： 39331097] {CVE-2026-43076}
    - media：as102：修复在 as102_usb_probe（） 中注册设备后不释放内存 （Jeongjun Park） [Orabug： 39273467] {CVE-2026-31578}
    - bcache：修复 cached_dev.sb_bio 释放后使用和崩溃 （Mingzhe Zou） [Orabug： 39273481] {CVE-2026-31580}
    - ALSA：6fire：修复断开连接时的释放后使用 （Berk Cem Goksel） [Orabug： 39273486] {CVE-2026-31581}
    - media：em28xx：修复 em28xx_v4l2_open（） 中的释放后使用 （Abhishek Kumar） [Orabug： 39273493] {CVE-2026-31583}
    - mm：blk-cgroup：修复 cgwb_release_workfn（） 中的释放后使用 （Breno Leitao） [Orabug： 39273507] {CVE-2026-31586}
    - KVM：x86：使用 MMIO 片段中的擦除字段保存小写入值 （Sean Christopherson） [Orabug：
    39273521] {CVE-2026-31588}
    - x86-64：重命名名称令人误解的“__copy_user_nocache（）”函数 （Linus Torvalds） [Orabug： 39323162] {CVE-2026-43073}
    - kernel：谨慎处理 dup_mmap() 失败和 uprobe 注册 (Liam R. Howlett) {CVE-2025-21709}
    - gpiolib：修复 gdev->srcu 的争用条件 （Pawel Narewski） [Orabug： 38887677] {CVE-2026-22986}
    - KVM：SEV：终止对KVM_MEMORY_ENCRYPT_REG_REGION大尺寸的警告 （Sean Christopherson） [Orabug：
    39273529] {CVE-2026-31590}
    - KVM：SEV：拒绝尝试同步已启动/加密的 vCPU 的 VMSA （Sean Christopherson） [Orabug： 39273553] {CVE-2026-31593}
    - ocfs2：处理 ocfs2_group_extend 中无效的 dinode （Zhengyuan Huang） [Orabug： 39273569] {CVE-2026-31596}
    - ocfs2：修复VM_FAULT_RETRY时 ocfs2_fault（） 中的释放后使用 （Tejas Bharambe） [Orabug： 39273578] {CVE-2026-31597}
    - ocfs2：修复 unlink 和 dio_end_io_write 之间可能的死锁 （Joseph Qi） [Orabug： 39273586] {CVE-2026-31598}
    - dcache：将存储段的最小数量限制为两个 （Zhihao Cheng） [Orabug： 39323133] {CVE-2026-43071}
    - ALSA：ctxfi：将 PTP 限制为单页 （Harin Lee） [Orabug：39273608] {CVE-2026-31602}
    - wifi：rtw88：修复探查故障时的设备泄漏 （Johan Hovold） [Orabug： 39273620] {CVE-2026-31604}

Tenable 已直接从 Oracle Linux 安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
313353	Linux Distros 未修补的漏洞：CVE-2026-43436	Nessus	Misc.	2026/5/8	2026/11/6	medium
361263	Rocky Linux 9.6 [TuxCare] 安全更新：kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / 等多个漏洞（ALMALINUX9.6：CLSA-2026：1780562693）	Nessus	Rocky Linux Local Security Checks	2026/10/1	2026/10/21	high
360687	AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / 等多个漏洞（ALMALINUX9.2：CLSA-2026：1783362244）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/19	high
340680	Ubuntu 24.04 LTS / Pro Realtime 24.04 LTS：Linux 内核（Raspberry Pi）漏洞（USN-8665-1）	Nessus	Ubuntu Local Security Checks	2026/8/26	2026/8/27	high
361300	AlmaLinux 9.6 [TuxCare] 安全更新：kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / 等多个漏洞（ALMALINUX9.6：CLSA-2026：1780562693）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/21	high
325292	Oracle Linux 10 / 9：Unbreakable Enterprise 内核 (ELSA-2026-50372)	Nessus	Oracle Linux Local Security Checks	2026/7/6	2026/10/29	high

检测

插件搜索

medium

high

high

high

high

high