There are packages installed that are affected by a vulnerability referenced in the following CVE:

  - In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the
    loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition
    bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8
    *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads
    ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where
    i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <=
    0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of
    ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and
    reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4
    at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check
    ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop
    guard, and reject at mount a $AttrDef too small to hold one attr_def entry. (CVE-2026-98136)

Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - 已解決 Linux 核心中的下列弱點：ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8
    *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. (CVE-2026-98136)

請注意，Nessus 依賴供應商報告的套件存在。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - 已修复 Linux 内核中的下列漏洞：ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8
    *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. (CVE-2026-98136)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8
    *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. (CVE-2026-98136)

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the     loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition     bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8
    *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads     ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where     i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <=     0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of     ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and     reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4     at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check     ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop     guard, and reject at mount a $AttrDef too small to hold one attr_def entry. (CVE-2026-98136)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
474654	Chainguard: linux-desktop-7.2-bootc: security update to 7.2.7-r0	Tenable Cloud Security	Chainguard Local Security Checks	2026/10/16	2026/10/16	high
474654	Chainguard: linux-desktop-7.2-bootc: security update to 7.2.7-r0	Tenable Self-Hosted Container Security	Chainguard Local Security Checks	2026/10/16	2026/10/16	high
350420	Linux Distros 未修補弱點：CVE-2026-98136	Nessus	Misc.	2026/9/25	2026/10/9	high
350420	Linux Distros 未修补的漏洞：CVE-2026-98136	Nessus	Misc.	2026/9/25	2026/10/9	high
350420	Linux Distros のパッチ未適用の脆弱性: CVE-2026-98136	Nessus	Misc.	2026/9/25	2026/10/9	high
350420	Linux Distros Unpatched Vulnerability : CVE-2026-98136	Nessus	Misc.	2026/9/25	2026/10/9	high

检测

插件搜索

high

high

high

high

high

high