CentOS Linux 6 [TuxCare] 安全更新：kernel / kernel-abi-whitelists / kernel-debug / kernel-debug-devel / etc 多个漏洞 （CENTOS6：CLSA-2025：1761139764）
high Nessus 插件 ID 351647
语言：
简介
CentOS Linux 主机缺少一个或多个安全更新。描述
CentOS Linux 6 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS6：CLSA-2025：1761139764公告中提及的多个漏洞的影响。- 已修复 Linux 内核中的下列漏洞：pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ([PATCH] replace cad_pid by a struct pid) from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`.
Full KASAN splat below. ================================================================== BUG: KASAN:
use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270:
slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff
---truncated--- (CVE-2021-47118)
- 已修复 Linux 内核中的下列漏洞：i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. (CVE-2021-47153)
- 已修复 Linux 内核中的下列漏洞：watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
(CVE-2021-47321)
- 已修复 Linux 内核中的下列漏洞：virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. (CVE-2021-47352)
- 已修复 Linux 内核中的下列漏洞：tty: Fix out-of-bound vmalloc access in imageblit This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will fix and fill the fb_var_screeninfo independently. (CVE-2021-47383)
请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。
解决方案
根据 TuxCare 公告 CENTOS6：CLSA-2025：1761139764 中的指南更新受影响的程序包。另见
插件详情
严重性: High
ID: 351647
文件名: tuxcare_centos_6_CLSA-2025-1761139764.nasl
版本: 1.1
类型: Local
代理: unix
发布时间: 2026/9/30
最近更新时间: 2026/9/30
支持的传感器: Nessus Agent, Continuous Assessment, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
风险信息
VPR
风险因素: High
分数: 7.6
百分位: 98.25
Vendor
Vendor Severity: Important
CVSS v2
风险因素: Medium
基本分数: 4.4
时间分数: 3.4
矢量: CVSS2#AV:L/AC:M/Au:N/C:P/I:P/A:P
CVSS 分数来源: CVE-2022-25265
CVSS v3
风险因素: High
基本分数: 7.8
时间分数: 7
矢量: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
时间矢量: CVSS:3.0/E:P/RL:O/RC:C
CVSS 分数来源: CVE-2024-56616
漏洞信息
必需的 KB 项: Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list, Host/OS/extended-third-party
可利用: true
易利用性: Exploits are available
补丁发布日期: 2025/10/22
漏洞发布日期: 2021/7/16
参考资料信息
CVE: CVE-2021-47118, CVE-2021-47153, CVE-2021-47321, CVE-2021-47352, CVE-2021-47383, CVE-2021-47391, CVE-2021-47633, CVE-2022-23038, CVE-2022-25265, CVE-2022-45884, CVE-2022-45885, CVE-2022-45886, CVE-2022-45919, CVE-2022-48695, CVE-2022-48760, CVE-2022-48827, CVE-2022-49407, CVE-2023-1077, CVE-2023-35824, CVE-2023-51779, CVE-2023-52530, CVE-2023-52594, CVE-2023-52764, CVE-2023-52868, CVE-2023-52885, CVE-2024-26958, CVE-2024-26974, CVE-2024-26982, CVE-2024-35896, CVE-2024-35937, CVE-2024-38538, CVE-2024-38578, CVE-2024-38599, CVE-2024-39487, CVE-2024-40901, CVE-2024-41014, CVE-2024-52332, CVE-2024-56597, CVE-2024-56616
CLSA: 2025:1761139764