AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / 等多个漏洞 （ALMALINUX9.2：CLSA-2024：1725293298）
high Nessus 插件 ID 353033
语言：
简介
AlmaLinux 主机缺少一个或多个安全更新。描述
AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2024：2024：1725293298 1 公告中提及的多个漏洞的影响。- 在采用设备文件“/dev/dri/renderD128（或 Dxxx）”的 Linux 内核中，在 GPU 组件的 drivers/gpu/vmxgfx/vmxgfx_execbuf.c 中的 vmwgfx 驱动程序中发现空指针取消引用漏洞。在系统中具有用户帐户的本地攻击者可利用此缺陷获得特权，造成拒绝服务 (DoS)。
(CVE-2022-38096)
- 已修复 Linux 内核中的下列漏洞：bnxt: prevent skb UAF after handing over to PTP worker When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. (CVE-2022-48637)
- 在 6.5.9 版之前在 Linux 内核中发现了一个问题，具有对 MMIO 寄存器的用户空间访问权限的本地用户可利用此漏洞。#VC 处理程序中的不正确访问检查和 MMIO 访问的 SEV-ES 模拟的指令模拟可能会导致对内核内存的任意写入访问（从而导致特权提升）。此问题依赖于竞争条件触发，通过该竞争条件，用户空间可以在 #VC 处理程序读取指令之前替换该指令。(CVE-2023-46813)
- 已修复 Linux 内核中的下列漏洞：PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo simple_ondemand > /sys/class/devfreq/1d84000.ufshc/governor echo performance > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled.
Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718:
timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr :
expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29:
ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16:
0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13:
ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated--- (CVE-2023-52635)
- 已修复 Linux 内核中的下列漏洞：sched/psi: Fix use-after-free in ep_remove_wait_queue() If a non-root cgroup gets removed when there is a thread that registered trigger and is polling on a pressure file within the cgroup, the polling waitqueue gets freed in the following path: do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy However, the polling thread still has a reference to the pressure file and will access the freed waitqueue when the file is closed or upon exit: fput ep_eventpoll_release ep_free ep_remove_wait_queue remove_wait_queue This results in use-after-free as pasted below. The fundamental problem here is that cgroup_file_release() (and consequently waitqueue's lifetime) is not tied to the file's real lifetime. Using wake_up_pollfree() here might be less than ideal, but it is in line with the comment at commit 42288cb44c4b (wait: add wake_up_pollfree()) since the waitqueue's lifetime is not tied to file's one and can be considered as another special case. While this would be fixable by somehow making cgroup_file_release() be tied to the fput(), it would require sizable refactoring at cgroups or higher layer which might be more justifiable if we identify more cases like this. BUG: KASAN: use-after-free in
_raw_spin_lock_irqsave+0x60/0xc0 Write of size 4 at addr ffff88810e625328 by task a.out/4404 CPU: 19 PID:
4404 Comm: a.out Not tainted 6.2.0-rc6 #38 Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017 Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 print_report+0x16c/0x4e0 kasan_report+0xc3/0xf0 kasan_check_range+0x2d2/0x310 _raw_spin_lock_irqsave+0x60/0xc0 remove_wait_queue+0x1a/0xa0 ep_free+0x12c/0x170 ep_eventpoll_release+0x26/0x30 __fput+0x202/0x400 task_work_run+0x11d/0x170 do_exit+0x495/0x1130 do_group_exit+0x100/0x100 get_signal+0xd67/0xde0 arch_do_signal_or_restart+0x2a/0x2b0 exit_to_user_mode_prepare+0x94/0x100 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x52/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Allocated by task 4404: kasan_set_track+0x3d/0x60
__kasan_kmalloc+0x85/0x90 psi_trigger_create+0x113/0x3e0 pressure_write+0x146/0x2e0 cgroup_file_write+0x11c/0x250 kernfs_fop_write_iter+0x186/0x220 vfs_write+0x3d8/0x5c0 ksys_write+0x90/0x110 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 4407:
kasan_set_track+0x3d/0x60 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x11d/0x170 slab_free_freelist_hook+0x87/0x150 __kmem_cache_free+0xcb/0x180 psi_trigger_destroy+0x2e8/0x310 cgroup_file_release+0x4f/0xb0 kernfs_drain_open_files+0x165/0x1f0 kernfs_drain+0x162/0x1a0
__kernfs_remove+0x1fb/0x310 kernfs_remove_by_name_ns+0x95/0xe0 cgroup_addrm_files+0x67f/0x700 cgroup_destroy_locked+0x283/0x3c0 cgroup_rmdir+0x29/0x100 kernfs_iop_rmdir+0xd1/0x140 vfs_rmdir+0xfe/0x240 do_rmdir+0x13d/0x280 __x64_sys_rmdir+0x2c/0x30 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2023-52707)
请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。
解决方案
根据 TuxCare 公告 ALMALINUX9.2：CLSA-2024：1725293298 中的指南更新受影响的程序包。另见
插件详情
严重性: High
ID: 353033
文件名: tuxcare_alma_linux_9.2_CLSA-2024-1725293298.nasl
版本: 1.1
类型: Local
发布时间: 2026/9/30
最近更新时间: 2026/9/30
支持的传感器: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
风险信息
VPR
风险因素: High
分数: 7.9
百分位: 99.36
Vendor
Vendor Severity: Critical
CVSS v2
风险因素: Medium
基本分数: 6.8
时间分数: 5.6
矢量: CVSS2#AV:A/AC:H/Au:N/C:C/I:C/A:C
CVSS 分数来源: CVE-2024-42225
CVSS v3
风险因素: High
基本分数: 7.8
时间分数: 7.2
矢量: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
时间矢量: CVSS:3.0/E:F/RL:O/RC:C
CVSS 分数来源: CVE-2024-42159
漏洞信息
必需的 KB 项: Host/OS/extended-third-party, Host/local_checks_enabled, Host/AlmaLinux/release, Host/AlmaLinux/rpm-list, Host/cpu
可利用: true
易利用性: Exploits are available
补丁发布日期: 2024/9/2
漏洞发布日期: 2021/7/21
CISA 已知可遭利用的漏洞到期日期: 2024/8/28
参考资料信息
CVE: CVE-2022-38096, CVE-2022-48637, CVE-2023-46813, CVE-2023-52635, CVE-2023-52707, CVE-2023-52809, CVE-2023-52885, CVE-2024-26602, CVE-2024-26669, CVE-2024-26925, CVE-2024-27397, CVE-2024-33621, CVE-2024-35823, CVE-2024-35885, CVE-2024-35890, CVE-2024-35896, CVE-2024-35962, CVE-2024-36017, CVE-2024-36020, CVE-2024-36883, CVE-2024-36929, CVE-2024-36960, CVE-2024-36971, CVE-2024-37353, CVE-2024-37356, CVE-2024-38384, CVE-2024-38552, CVE-2024-38558, CVE-2024-38581, CVE-2024-41087, CVE-2024-41090, CVE-2024-41091, CVE-2024-42154, CVE-2024-42159, CVE-2024-42161, CVE-2024-42225, CVE-2024-42228
CLSA: 2024:1725293298