CentOS Linux 7 [TuxCare] 安全更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / 等多个漏洞 （CENTOS7：CLSA-2026：1773056241）
high Nessus 插件 ID 361774
语言：
简介
CentOS Linux 主机缺少一个或多个安全更新。描述
CentOS Linux 7 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS7：CLSA-2026：2026：1773056241 公告中提及的多个漏洞的影响。- 已修复 Linux 内核中的下列漏洞：VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300-0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace:
<TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2023-53259)
- 已修复 Linux 内核中的下列漏洞：Bluetooth: fix use-after-free in device_for_each_child() Syzbot has reported the following KASAN splat: BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0 Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980 CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 ? device_for_each_child+0x18f/0x1a0 print_report+0x13a/0x4cb ?
__virt_addr_valid+0x5e/0x590 ? __phys_addr+0xc6/0x150 ? device_for_each_child+0x18f/0x1a0 kasan_report+0xda/0x110 ? device_for_each_child+0x18f/0x1a0 ? __pfx_dev_memalloc_noio+0x10/0x10 device_for_each_child+0x18f/0x1a0 ? __pfx_device_for_each_child+0x10/0x10 pm_runtime_set_memalloc_noio+0xf2/0x180 netdev_unregister_kobject+0x1ed/0x270 unregister_netdevice_many_notify+0x123c/0x1d80 ? __mutex_trylock_common+0xde/0x250 ?
__pfx_unregister_netdevice_many_notify+0x10/0x10 ? trace_contention_end+0xe6/0x140 ?
__mutex_lock+0x4e7/0x8f0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x12/0xc0 ? unregister_netdev+0x12/0x30 unregister_netdevice_queue+0x30d/0x3f0 ?
__pfx_unregister_netdevice_queue+0x10/0x10 ? __pfx_down_write+0x10/0x10 unregister_netdev+0x1c/0x30 bnep_session+0x1fb3/0x2ab0 ? __pfx_bnep_session+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ?
__pfx_woken_wake_function+0x10/0x10 ? __kthread_parkme+0x132/0x200 ? __pfx_bnep_session+0x10/0x10 ? kthread+0x13a/0x370 ? __pfx_bnep_session+0x10/0x10 kthread+0x2b7/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x48/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 4974: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x1d1/0x440 hci_alloc_dev_priv+0x1d/0x2820 __vhci_create_device+0xef/0x7d0 vhci_write+0x2c7/0x480 vfs_write+0x6a0/0xfc0 ksys_write+0x12f/0x260 do_syscall_64+0xc7/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 4979: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x4f/0x70 kfree+0x141/0x490 hci_release_dev+0x4d9/0x600 bt_host_release+0x6a/0xb0 device_release+0xa4/0x240 kobject_put+0x1ec/0x5a0 put_device+0x1f/0x30 vhci_release+0x81/0xf0 __fput+0x3f6/0xb30 task_work_run+0x151/0x250 do_exit+0xa79/0x2c30 do_group_exit+0xd5/0x2a0 get_signal+0x1fcd/0x2210 arch_do_signal_or_restart+0x93/0x780 syscall_exit_to_user_mode+0x140/0x290 do_syscall_64+0xd4/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when an underlying (kobject) reference counter is greater than 1. This means that reparenting (happened when the device is actually freed) is delayed and, during that delay, parent controller device (hciX) may be deleted. Since the latter may create a dangling pointer to freed parent, avoid that scenario by reparenting to NULL explicitly. (CVE-2024-53237)
- 已修复 Linux 内核中的下列漏洞：wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. (CVE-2024-58014)
- 已修复 Linux 内核中的下列漏洞：partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp().
(CVE-2025-21772)
- 已修复 Linux 内核中的下列漏洞：net: ppp: Add bound checking for skb data on ppp_sync_txmung Ensure we have enough data in linear buffer from skb before accessing initial bytes. This prevents potential out-of-bounds accesses when processing short packets. When ppp_sync_txmung receives an incoming package with an empty payload: (remote) gef p *(struct pppoe_hdr *) (skb->head + skb->network_header) $18 = { type = 0x1, ver = 0x1, code = 0x0, sid = 0x2, length = 0x0, tag = 0xffff8880371cdb96 } from the skb struct (trimmed) tail = 0x16, end = 0x140, head = 0xffff88803346f400 4, data = 0xffff88803346f416 :\377, truesize = 0x380, len = 0x0, data_len = 0x0, mac_len = 0xe, hdr_len = 0x0, it is not safe to access data[2]. [[email protected]: fixed subj typo] (CVE-2025-37749)
请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。
解决方案
根据 TuxCare 公告 CENTOS7：CLSA-2026：1773056241 中的指南更新受影响的程序包。另见
插件详情
严重性: High
ID: 361774
文件名: tuxcare_centos_7_CLSA-2026-1773056241.nasl
版本: 1.1
类型: Local
代理: unix
发布时间: 2026/10/1
最近更新时间: 2026/10/1
支持的传感器: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
风险信息
VPR
风险因素: High
分数: 7.6
百分位: 98.58
Vendor
Vendor Severity: Important
CVSS v2
风险因素: Medium
基本分数: 6.8
时间分数: 5
矢量: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS 分数来源: CVE-2025-39911
CVSS v3
风险因素: High
基本分数: 7.8
时间分数: 6.8
矢量: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
时间矢量: CVSS:3.0/E:U/RL:O/RC:C
漏洞信息
必需的 KB 项: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list
易利用性: No known exploits are available
补丁发布日期: 2026/3/9
漏洞发布日期: 2023/3/21
参考资料信息
CVE: CVE-2023-53259, CVE-2024-53237, CVE-2024-58014, CVE-2025-21772, CVE-2025-37749, CVE-2025-37780, CVE-2025-37923, CVE-2025-38102, CVE-2025-38249, CVE-2025-38724, CVE-2025-39853, CVE-2025-39860, CVE-2025-39911, CVE-2025-39973, CVE-2025-39993, CVE-2025-40240, CVE-2025-40248, CVE-2025-40277, CVE-2025-40304, CVE-2025-40322
CLSA: 2026:1773056241