远程 Redhat Enterprise Linux 9 主机上安装的程序包受到 RHSA-2026:2573 公告中提及的多个漏洞影响。

    内核程序包中包含 Linux 内核，后者是任何 Linux 操作系统的核心。

    安全修复：

    * kernelLinux 内核ath9k_htc 越界访问漏洞 (CVE-2022-49503)

    * kernelLinux 内核由于 nexthop 哈希大小不正确在 VXLAN 中存在越界写入从而导致拒绝服务 (CVE-2023-53192)

    * kernel: Bluetooth: hci_event: 在删除 conn 前调用断开连接回调 (CVE-2023-53673)

    * kernel: devlink: rate：未设置 devl_rate_nodes_destroy 中的父指针 (CVE-2025-40251)

    * kernelLinux 内核蓝牙 L2CAP由于通过争用条件造成的释放后使用导致内核崩溃CVE-2023-53751]

    * 内核Linux 内核fbdev 中的越界写入可能导致权限升级、信息泄露或拒绝服务。 (CVE-2025-40304)

    * kernel: Linux kernel：因字形处理中的越界读取导致信息泄露和拒绝服务 (CVE-2025-40322)

    * kernel: ext4修复 ext4_orphan_cleanup 中的释放后使用 (CVE-2022-50673)

    * kerneldrm/i915通过检查 new_crtc_state 修复空 ptr 取消引用 (CVE-2023-53833)

    * kernel: net: atlantic : 修复 RX 路径中的片段溢出处理 (CVE-2025-68301)

    * kernel: tcp：修复 tcp_add_backlog() 中的有符号整数溢出缺陷 (CVE-2022-50865)

    有关上述安全问题的更多详细信息，包括其影响、CVSS 得分、致谢，以及其他相关信息，请参阅列于“参考”部分的 CVE 页面。

Tenable 已直接从 Red Hat Enterprise Linux 安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

如 TuxCare CENTOS8.5：CLSA-2026：1768775579公告所述，CentOS Linux 8.5 主机上安装的程序包受到多个漏洞的影响。

  - 在 Linux 内核 3.16 至 5.6.2 内 drivers/net/can/slcan.c 中的 slc_bump 中发现问题。攻击者可利用此漏洞，在配置缺少 CONFIG_INIT_STACK_ALL 时，读取未初始化的 can_frame 数据，从而控制内核堆栈内存中的敏感信息，亦即 CID-b9258a2cece4。
    (CVE-2020-11494)

  - 在具有设备文件“/dev/dri/renderD128（或 Dxxx）”的 Linux 内核中，drivers/gpu/vmxgfx/vmxgfx_kms.c 的 vmwgfx 驱动程序中发现越界 (OOB) 内存访问漏洞。在系统中具有用户帐户的本地攻击者可利用此缺陷获得特权，造成拒绝服务 (DoS)。CVE-2022-36280

  - 已修复 Linux 内核中的下列漏洞：ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix The rxstatus->rs_keyix eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()' (CVE-2022-49503)

  - 已修复 Linux 内核中的下列漏洞：ata: libata-transport: fix double ata_host_put() in ata_tport_add() In the error path in ata_tport_add(), when calling put_device(), ata_tport_release() is called, it will put the refcount of 'ap->host'. And then ata_host_put() is called again, the refcount is decreased to 0, ata_host_release() is called, all ports are freed and set to null.
    When unbinding the device after failure, ata_host_stop() is called to release the resources, it leads a null-ptr-deref(), because all the ports all freed and null. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc :
    ata_host_stop+0x3c/0x84 [libata] lr : release_nodes+0x64/0xd0 Call trace: ata_host_stop+0x3c/0x84 [libata] release_nodes+0x64/0xd0 devres_release_all+0xbc/0x1b0 device_unbind_cleanup+0x20/0x70 really_probe+0x158/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120
    __driver_attach+0xb4/0x220 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x40 bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __pci_register_driver+0x4c/0x60 ahci_pci_driver_init+0x30/0x1000 [ahci] Fix this by removing redundant ata_host_put() in the error path. (CVE-2022-49826)

  - 已修复 Linux 内核中的下列漏洞：capabilities: fix undefined behavior in bit shift for CAP_TO_MASK Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace:
    <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e
    __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0
    __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> (CVE-2022-49870)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

如 TuxCare CENTOS8.4：CLSA-2026：1771078945公告所述，CentOS Linux 8.4 主机上存在安装的程序包，该漏洞会受到多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ([PATCH] replace cad_pid by a struct pid) from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`.
    Full KASAN splat below. ================================================================== BUG: KASAN:
    use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270:
    slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff
    ---truncated--- (CVE-2021-47118)

  - 已修复 Linux 内核中的下列漏洞：i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot:
    https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. (CVE-2021-47153)

  - 已修复 Linux 内核中的下列漏洞：scsi: target: Fix WRITE_SAME No Data Buffer crash In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like sg_write_same --ndob we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. (CVE-2022-21546)

  - 已修复 Linux 内核中的下列漏洞：net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. (CVE-2022-48883)

  - 已修复 Linux 内核中的下列漏洞：ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix The rxstatus->rs_keyix eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()' (CVE-2022-49503)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

远程 Redhat Enterprise Linux 9 主机上安装的程序包受到 RHSA-2026:2577 公告中提及的多个漏洞影响。

    kernel-rt 程序包提供 Real Time Linux Kernel，支持对具有极高确定性要求的系统进行微调。

    安全修复：

    * kernelLinux 内核ath9k_htc 越界访问漏洞 (CVE-2022-49503)

    * kernelLinux 内核由于 nexthop 哈希大小不正确在 VXLAN 中存在越界写入从而导致拒绝服务 (CVE-2023-53192)

    * kernel: Bluetooth: hci_event: 在删除 conn 前调用断开连接回调 (CVE-2023-53673)

    * kernel: devlink: rate：未设置 devl_rate_nodes_destroy 中的父指针 (CVE-2025-40251)

    * kernelLinux 内核蓝牙 L2CAP由于通过争用条件造成的释放后使用导致内核崩溃CVE-2023-53751]

    * 内核Linux 内核fbdev 中的越界写入可能导致权限升级、信息泄露或拒绝服务。 (CVE-2025-40304)

    * kernel: Linux kernel：因字形处理中的越界读取导致信息泄露和拒绝服务 (CVE-2025-40322)

    * kernel: ext4修复 ext4_orphan_cleanup 中的释放后使用 (CVE-2022-50673)

    * kerneldrm/i915通过检查 new_crtc_state 修复空 ptr 取消引用 (CVE-2023-53833)

    * kernel: net: atlantic : 修复 RX 路径中的片段溢出处理 (CVE-2025-68301)

    * kernel: tcp：修复 tcp_add_backlog() 中的有符号整数溢出缺陷 (CVE-2022-50865)

    有关上述安全问题的更多详细信息，包括其影响、CVSS 得分、致谢，以及其他相关信息，请参阅列于“参考”部分的 CVE 页面。

Tenable 已直接从 Red Hat Enterprise Linux 安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - ath9k_htc修复无效 rxstatus->rs_keyix 可能发生的越界访问 rxstatus->rs_keyix 最终会传递至 test_bit() 因此我们需要确保其位于位图中。
    drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() 错误将不受信任的数据“rx_stats->rs_keyix”传递到“test_bit()”(CVE-2022-49503)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
298707	RHEL 9：内核 (RHSA-2026:2573)	Nessus	Red Hat Local Security Checks	2026/2/11	2026/2/11	high
353189	CentOS Linux 8.5 [TuxCare] 安全更新：bpftool / kernel / kernel-core / kernel-cross-headers / 等多个漏洞（CENTOS8.5：CLSA-2026：1768775579）	Nessus	CentOS Local Security Checks	2026/9/30	2026/10/19	high
361173	CentOS Linux 8.4 [TuxCare] 安全更新：bpftool / kernel / kernel-core / kernel-cross-headers / 等多个漏洞（CENTOS8.4：CLSA-2026：1771078945）	Nessus	CentOS Local Security Checks	2026/10/1	2026/10/1	high
298682	RHEL 9：kernel-rt (RHSA-2026:2577)	Nessus	Red Hat Local Security Checks	2026/2/11	2026/2/11	high
226140	Linux Distros 未修补的漏洞：CVE-2022-49503	Nessus	Misc.	2025/3/5	2026/11/12	high

检测

插件搜索

high

high

high

high

high