CentOS Linux 8.5 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS8.5：CLSA-2026：2026：1773047921公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 (CVE-2021-47101)

  - 已修复 Linux 内核中的下列漏洞：net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing:
    #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes
    */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */} insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4
    */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. pahole shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. objdump -d shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). (CVE-2022-48744)

  - 已修复 Linux 内核中的下列漏洞：NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d (NFS: Always provide aligned buffers to > the RPC read layers) on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.
    (CVE-2022-48827)

  - 已修复 Linux 内核中的下列漏洞：virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac
    __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. (CVE-2022-49687)

  - 已修复 Linux 内核中的下列漏洞：ceph: avoid putting the realm twice when decoding snaps fails When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues. (CVE-2022-49770)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2026：1777616064公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：tracing: Fix potential double free in create_var_ref() In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function. Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref(). (CVE-2022-49410)

  - 已修复 Linux 内核中的下列漏洞：net: mdio: fix undefined behavior in bit shift for __mdiobus_register Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e
    __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK> (CVE-2022-49907)

  - 已修复 Linux 内核中的下列漏洞：vt: Clear selection before changing the font When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called.
    (CVE-2022-49948)

  - 已修复 Linux 内核中的下列漏洞：wifi: iwlwifi: mvm: fix double free on tx path. We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ?
    __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0:
    0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ?
    __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ?
    __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
    __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0
    __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP:
    0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX:
    000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11:
    0000000000000246 R ---truncated--- (CVE-2022-50248)

  - 已修复 Linux 内核中的下列漏洞：mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called.
    (CVE-2022-50347)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

CentOS Linux 7 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS7：CLSA-2026：2026：1788170774 公告中提及的多个漏洞的影响。

  - 5.12-rc8 之前的 Linux 内核 SCTP 套接字 (net/sctp/socket.c) 中存在争用情形，可从网络服务上下文或无特权进程造成内核权限升级。如果在没有 sock_net(sk)->sctp.addr_wq_lock 的情况下调用 sctp_destroy_sock，则会从 auto_asconf_splist 列表中删除一个元素，而不会进行任何适当的锁定。如果附加的 BPF_CGROUP_INET_SOCK_CREATE 拒绝创建某些 SCTP 套接字，则具有网络服务权限的攻击者可利用此问题升级到根级权限或直接从非特权用户上下文升级权限。(CVE-2021-23133)

  - 已修复 Linux 内核中的下列漏洞：drm: Fix use-after-free read in drm_getunique() There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex. An example can be seen in the crash report of the use-after-free error found by Syzbot:
    https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked. To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test. (CVE-2021-47280)

  - 已修复 Linux 内核中的下列漏洞：scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. (CVE-2021-47565)

  - 已修复 Linux 内核中的下列漏洞：dm btree remove: fix use after free in rebalance_children() Move dm_tm_unlock() after dm_tm_dec(). (CVE-2021-47600)

  - 已修复 Linux 内核中的下列漏洞：media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init Syzbot reported that -1 is used as array index. The problem was in missing validation check. hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that. hdw->workpoll initialization moved upper to prevent warning in __flush_work.
    (CVE-2022-49478)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

CentOS Linux 8.4 主机上存在安装的程序包，该程序包受到 TuxCare CENTOS8.4：CLSA-2026：1773048865公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing:
    #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes
    */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */} insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4
    */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. pahole shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. objdump -d shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). (CVE-2022-48744)

  - 已修复 Linux 内核中的下列漏洞：NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d (NFS: Always provide aligned buffers to > the RPC read layers) on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.
    (CVE-2022-48827)

  - 已修复 Linux 内核中的下列漏洞：Bluetooth: L2CAP: Fix user-after-free This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace: Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref) Bluetooth: chan 0000000023c4974d Bluetooth: parent 00000000ae861c08 ================================================================== BUG: KASAN: use-after-free in
    __mutex_waiter_is_first kernel/locking/mutex.c:191 [inline] BUG: KASAN: use-after-free in
    __mutex_lock_common kernel/locking/mutex.c:671 [inline] BUG: KASAN: use-after-free in
    __mutex_lock+0x278/0x400 kernel/locking/mutex.c:729 Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389 (CVE-2022-50386)

  - 已修复 Linux 内核中的下列漏洞：scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete slow_task->timer. However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below:
    (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ...
    sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the task->slow_task is deallocated. (CVE-2022-50422)

  - 已修复 Linux 内核中的下列漏洞：kernfs: fix use-after-free in
    __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
    __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
    __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX:
    00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13:
    0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855:
    kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated--- (CVE-2022-50432)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - wifibrcmfmac修复 brcmf_fw_alloc_request() 中可能发生的位移越界。此修补程序修复了 BIT(chiprev) 中当设备提供的“chiprev”太大时会发生的 brcmfmac 中的位移越界。 。它也不应等于或大于 BITS_PER_TYPE(u32)因为我们要与 u32 变量和 BIT(chiprev) 进行按位 AND 运算。该修补程序添加了一项检查使函数在这种情况下返回 NULL。
    请注意NULL 的情况稍后由总线特定的调用程序例如 brcmf_usb_probe_cb() 或 brcmf_usb_reset_resume()处理。此问题由 syzkaller 的修改版本发现。UBSANdrivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c 位移指数 151055786 中的位移越界对于 64 位类型“long unsigned int”CPU: 0 PID: 1885 Comm: kworker /0:2 受感染GO 5.14.0+ #132 硬件名称QEMU Standard PC (i440FX + PIIX, 1996)BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org04/01/2014 工作队列usb_hub_wq hub_event 调用Trace dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40
    __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ?
    _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 real_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 real_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10
    __kthread_arkme+0xd9/0x1d0 ? pr ---truncated--- (CVE-2022-50551)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

ID	名称	产品	系列	发布时间	最近更新时间	严重程度
352370	CentOS Linux 8.5 [TuxCare] 安全更新：bpftool / kernel / kernel-core / kernel-cross-headers / 等多个漏洞（CENTOS8.5：CLSA-2026：1773047921）	Nessus	CentOS Local Security Checks	2026/9/30	2026/9/30	high
353159	AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / 等多个漏洞（ALMALINUX9.2：CLSA-2026：1777616064）	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/10/1	high
359803	CentOS Linux 7 [TuxCare] 安全更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / 等多个漏洞（CENTOS7：CLSA-2026：1788170774）	Nessus	CentOS Local Security Checks	2026/10/1	2026/10/1	high
361020	CentOS Linux 8.4 [TuxCare] 安全更新：bpftool / kernel / kernel-core / kernel-cross-headers / 等多个漏洞（CENTOS8.4：CLSA-2026：1773048865）	Nessus	CentOS Local Security Checks	2026/10/1	2026/10/1	high
270169	Linux Distros 未修补的漏洞：CVE-2022-50551	Nessus	Misc.	2025/10/13	2026/8/27	high

检测

插件搜索

high

high

high

high

high